id be interested in a front lip .. would go dynamite with my black/chrome style ;)

i have a steering wheel in good condition. got both the steering wheel and the front padding. ill give it to you for $50 ono without postage.

Any chance you have an electronic dizzy?
Grew up in Perth (northern suburbs). Miss the beaches like crazy..

Any chance you have an electronic dizzy?
Grew up in Perth (northern suburbs). Miss the beaches like crazy..

OK.... I know this has been done to death. I have searched Datsun1200 and Ozdat PLUS the net.
So much information to sift through and I am still confused.
All I can find is talk about using " stanza " stuff.

Now I have got 200B struts because I could not find 120Y or 180B struts if my bloody life depended on it. I have changed the lower spring perches to 1200 ones. Fitted 200B strut to 1200 ute.

Bits I have:

200B steering arms, lower control arms and castor rods.
1200 steering arms, lower control arms and castor rods.

Now to my bloody problem and HUGE confusion....

1. Which steering/control arm do I use?
If I use the 1200 ones I have to drill the steering arm bolts to about 12.5mm to fit the bolts of the 200B strut.

2. If I use the 200B steering/control arms I have to replace the inner control arm bush so the inner bore is smaller. Or drill out body for larger bolt.

3. The centre bore of the 200B control arm bush is larger than the hole in the body. So if I use 1200 bolt it will flop around in the bush.

4. Will always use 1200 castor rod.

So....... AAAAAARGH HELP!!!!!!!

What the hell do I do ? ?

Anybody fitted 120y seats to the ute. Stupid question I know but wanted to know if any tricks I need to know.

Cheers Nick

I'm searching for an electronic dizzy for an A12 engine.
I am also chasing seats to fit a 1200 ute. Need to be 1200 or at least Datsun as it needs to be 'standard looking' to avoid need for mod plate. P player will be driving it and don't want boys in blue to have a fit. Needs to be in Brisbane or within 1 hr drive.

Any help would be appreciated.

Cheers Nick

Forgot to mention I am in brisbane. Wellington point area

I also have a set of 12" and 13" rims. The 13's have new rubber on them. I have just bought R31's so need some 14" tyres. Anyone interested in the rims I have.

I have already taken the 200B struts I bought apart, and tried to get my head around the some advice to cut the 1200 spring perch off and weld it onto the 200b struts. It has come to my attention that the tube on the 200B it 51mm in width, but the width of the 1200 strut is only 46mm so the perch wont fit,

Can someone please help me....