Hi mike, I have a pair of cheviot 13 x6 jelly beans if interested. $50 + ship

Cheers

I think I have most of what you need. Send me a PM, I am in Southern Suburbs Sydney. freight to Melb should be easy.

The last engine built for my coupe was 1525cc all the bells and whistles. Made 182 hp at the fly and 123 HP at the wheels. On e85. NA on twin 40 doce 2 webers. Over $7k worth of parts/ machining and Dyno time. Below is a link to one of the many power runs on the dyno

Power Run

Looks like a very solid original car.

bad idea i think. better to use blanking plate with a suitably sized bypass hole. you need to regulate the flow and pressure of the coolant.

This subject is covered in depth in the great technical reference book. 4-stroke performance tuning by A Graham Bell

There is a relationship with block pressure generated by the water pump and the operating temperature requirements. 30PSI seems to be the sweet spot for block pressure. Pump speed is the variable here.

slip disks between the leaves?

Is the bump stop above the diff centre still installed? I had to remove the one in my coupe [H165 housing fitted] as the diff was pivoting on the bump stop under load when cornering.

Is it possible to floor pan is touching the diff housing at the third member and pivoting, under high load conditions. The H190 housing is physically larger [taller] than the H145/H165 housings.

early or late. Dizzy up front or midway?

Saw these on Gumtree located in WA. Seems like a fair deal. These are not mine nor do I know the seller.

Superlite Wheel 13x6 114.3 PCD