Can be had in Australia locally. I picked one up a couple of months back.

I don’t think the plain one is any different from the others, other than it’s not been on a mill to machine the ribs., just polished. Interesting spin as being sold as a limited edition with less machine time theoretically

Thanks for the offer, however I have one of these. A H10 embossed cam could also be a contender.

Out of a12 early is the h23 and late is the h57. From memory they a bit more duration for a bit more performance. Nothing over the top. Aftermarket regrinds would have move sporty or race potential. Do you have one?

Hi all, I’m on the hunt for the following factory camshafts. Either or both.l I’m looking for H23 or H57 embossed on the part. Pease let me know if you have one surplus to your needs.
Cheers
Benny

I thought the manifold looked familiar. I’m banking on this setup is off a Fairlady sports SRL311

Sports 2000

I have bought product from this business previously. The shift insert may be compatible for the 60L. It’s listed for the externally shifted 60a out of the c22 van. Check the wiki for the Nissan part number reference. I also bought the input shaft to replace my extremely worn one in my 60a. Needed a little machining to adjust the seated height for the input bearing. They differ by about 2.5mm from memory. They also sell replacement cluster shafts. Only difference is the 3rd gear ratio, so it makes sense to buy 3rd gear also, which they sell. We have to think outside the box now to keep these old cars running now. Parts are slim on the ground.

EH auto parts

What’s the going rate these days for genuine Simmons. ? I have a set as new, I bought nearly twenty years ago.

You are in luck, these are still available new from Nissan. I checked through my local supplier. Listed at $1 AUD each.

SPRING, SHIFTING INSERT
Genuine Nissan 32602-32200

That would be awesome thanks

Hi all, I am in need of a 1200 room heater core. Mine has developed a leak that can’t be repaired without re-coring. I please let me know if you have one. Regards, benny