Oh how i miss the sounds of N/A A series! The turbo really does take the rasp off any exhaust note.

Congrats on a nice project build. but don't ever say the 'f' word when you're talkin about dattos. Finished.

this is exactly the same reaction that topgear got when he made his H165 LSD, and frankthedolphintrainer got when he group made his turbo manifolds. Everyone wants but no one can afford. For funks sake people, this is top quality merchandise we're talkin about and to put it in perspective, most people who own a bmw don't even flinch when every 6 months they spend $3,000 on a grease/oil change. How can you complain about 1600 bucks for top quality kevlar?

pm sent.

what happened to this one?

pi x (0.5x[bore]^2) x stroke x 4.

3.142 x 3.85^2 x 8.2 x 4 = 1527.6cm^3

hey bro got a fully sick one bro over here bro. ring for a price bro hey? cya bro.

very slim chance of warping a A series head seeing how they're about 1' long!!!

I did mine about 3 months ago and the gasket set from burson's was about 26 bucks.

takes about 40mins to get the head off. i would get it surface ground and hardness tested. Clean block with wet and dry and about 1hour to put back on and adjust rocker lash.

easy.

i used to get between 6L-7L per 100km out the road. now with turbo i get about 9L/100km. noty too sure what that is in the old money.

As the title says. i am in desperate need of a T50 toyota gearbox. Can be in any condtion, so long as the front cog on the input shaft is in one piece (not missing 2 teeth like mine).

would prefer only to buy the one cog but will buy complete box if needed.

Thanks all.
i can be contacted on 0434126706 or reply on here
Cam

well as far as the turbine inlet flange goes they are exactly the same. being off a gtir the T28 is probably set at a different angle (compressor housing relative to turbine housing) so you may need to change the angle on your T25 to suit your piping.

i can't think of anything else at the moment.