good condition, will post at buyer expense
$140 for the both

cheers Josh
contact via here or jpriseman200b@yahoo.com which is also my msn,

Sr20de, complete with 5spd, computer wiring loom and so on. $1200 ono

twin 45mm webbers with linkages on an L18 manifold. $450ono

L18 motor, bigger cam shaft and am unsure of the rest as i didn't build it, goes well. $300ono.

240k front struts and brakes modified with pedders springs and adjustable spring platform. were in a rally car $300.

Stanza struts and brakes, All cleaned and painted, Brakes as well no springs or shocks $100.

Cross member to fit L series into a datsun 1200, $100.

Datsun 1200 rear quarter window glass. the opening ones, Both side, $120 cause i reckon they are hard to get now

6 rally tyres on 280zx rims, Good condition, $500 ono

All items can be shipped but at buyers cost.
Best thing to do is either email or ring me as I am not on here a great deal. jpriseman200b@yahoo.com or mobile 0418434046

2x honda prelude seats, Good condtion, no tears just need a clean as they have been in my garage for a while. $200ono

Datsun stanza front struts, Pulled down, cleaned and painted, come with brakes, lower control arms, steering arms, strut tops.
$100 ono

A12 incomplete, no manifolds or alternator.
$50

Datsun 1200 cross member converted to fit L16,L18 or L20b, Painted and finished, Just need reinforcement around where the trailing arm holes are.
$70

I will ship everything bar the motor cause it's ot really worth the effort. You pay costs.

Cheers Josh
Probably best to email as i don't come on here that much. jpriseman200b@yahoo.com

Goodaye I am from hobart
I used to own a datsun 1200 coupe but unfortunatley it never made it onto the rd.
Also owned 200bsx with worked l20b and twin solexs (went pretty well) and then i had a nissan bluebird Trx 1984 model.
The only thing i didn't like about datsun were the diffs, the only one that seemed to keep upto me was the bluebird 10 bolt (H190)

Really want some thing to compete in Improved produtcion. Doesn't have to be complete but would prefer.
Just let me know what you have got

Cheers josh
jpriseman200b@yahoo.com

You got another Pm
Cheers Josh

As it says, all panels ar rooted but glass, tail lights other bits and pieces are good just let me know what you want and i will get photos for you.
Also datsun 1200 crossmember modified to suit any L series engine excellent condition, very professional. $70
A12 motor, no manifols or carby, $50

Cheers josh
jpriseman200b@yahoo.com.

subject is question

Thanks

I have managed to find an A-14 which has been put into a sunny wagon. Any way what is the best way to get these motors to perform and rev hard.
Couple of sugestions i have heard (can you tell if it works or is it just a load of crap)

Bolt A-12 head onto A-14 block (high
compression) can it be done

Use A15 crank rods and pistons machined to fit A14 block again can it be done

You tell me what is the best formula is to get power out of these little beast motors

Cheers Josh

Worked L20b With twin solex Carbies Lightened flywheel,ported and shaved head. about 3000k's old. Goes very well

L20b tired with cam still runs not quite complete.

L20b Original 150 000k's never rebuilt runs extremely well complete.

4spd 200b box and 5spd trx bluey box and also a crossmember i have made to fit an L20b into 1200. Just needs to be reinforced around where new holes have been drilled for extra negative camber(control arm holes)

Now all above is for sale but if any one has a good offer on an A-15 and maybe a box and crossmember It will be looked upon highly.

I can also organise frieght if any one is intrested

Cheers Josh