+ Register
|
Main Menu
Login
Fast Search Slow Search
Google Ad |
Browsing this Thread:
1 Anonymous Users
#1
Universal Joints!!
gillfreitas
Posted on: 2001/6/18 3:12
My Uni joint on the tail shaft is phucked
As I understand they are pressed from factory on the utes and I require a whole new tailshaft! Is their an alternative such as machining a replacement on or am I left to cut and shut the tailshaft using a replaceble uni (bluebird yolk and flange)??  
#2
Re: Universal Joints!!
buzzard1200
Posted on: 2001/6/18 6:43
a restaked universal joint can be milled out at amachinist shop and replaced for around $110 aus but as standard they are pretty weak,,, i got quoted $500 for a totally
new tailshaft that can handle 350 hp ,,, didnt have $500 SO MINE STILL CLICKS EVERY TIME I TAKE OFF :( buzzard cya
#3
Re: Universal Joints!!
mr_nismo4
Posted on: 2001/6/18 8:20
Both of mine were shot when I went for rego, so luckily they replaced the worst one only and it past rego inspection.
The cost was $135 for one (thats why I didnt get two done, ie front and rear). They must break them appart or something because mine has four or so tack welds to hold it back together. Sounds dodgy but I have never had a problem!
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|
