Ok got my hands on "an electronic distributer" looks almost tbe same as the origanal. It has about 2 wires that come out of it. No idee af what car.

So my question, Can any one, please, explain to me how to wire it up, this idiot doesnt have a clue!!

See Electronic Ignition to match up with the many photos there.

According to what i have heard, i need some kind of module
to operate the hole sistem. the module can be one from a vw or some toyota. Has 3 conection points, but i cannot find how to wire it.
any idea someone....

Did ya get a coil to go with it mate? I have just wired up the 2 wires to the terminals on the coil. Runs like a dream.

Do i need a nother coil or is the std ute coil ok?
What i can find on the e/dist is the b310's, it has a black box on the side, but the one a have does not.
By the why is the b310 the first frontwheel drive (pulsar sa) or the stanza L series enjin?

There are four factory Datsun A-series type
* Matchbox type (USA and JDM)
* Late Vanette type and 1200 B120 type
* The big white box type (JDM)
* Big box type (B210 USA)

The late 1200 type does not use an external box.
What does your's look like?

i dont have a pic, on first glance its the same only small differences, no condencer, too wires coming out of it, the small plate that holds it in place is different, the shaft going in the block has got a resecs not strait.
i would like to find out for what car it comes than i can maby get a wire diagram on that car (SA model )

stil need to get my head around what cars are caled over that side.

go to www.race-tech.co.za. the guy is also on here, but there is a whole instruction on howto build and what is needed

this is the direct link to the electronic dist page. http://www.race-tech.co.za/gallery/main.php?g2_itemId=943

Hi RyanFury. thanks for the site you segested im on there as we speak and i must say there is some good stuff there apart from the distributer. From what i have read up to now i think i have the box sentra's distributer but still looking...
and to think Race-tech is in sa and i dident even know....
Thanks boet.