Browsing this Thread:
1 Anonymous Users
|
|
Re: FREE Advice Needed |
|
|
Guest_
|
anything bigger than a stock ca18 tissuebox intercooler will be better. vr4 have a nice size and flowing core, so do gtir pulsars, toyota supras etc.
Just jap $100 ones are better than a stock ca18 cooler...... full stop
Posted on: 2007/2/23 4:51
|
|
|
|
|
Re: FREE Advice Needed |
|
Quite a regular  
Joined:
2005/8/3 5:06
From Middle Of Australia
Group:
Registered Users
|
How bout a Just Jap Cooling Pro Bar and Plate 550x180x65 with 2 inch outlets for $149 as it fits behind the grill which is 200. Or should I just go 600/450x300x76 with 2.5/3 inch outlets for $20ish more?
Posted on: 2007/2/23 5:06
|
|
_________________
Poster: sunny Date: 2007/4/7 23:40:48
we could round up all the 1200 utes that no one wants and send them to the states.
done the round up, sorry no unwanted ones here.
1200 Ute Project-CA18DET
|
|
|
Re: FREE Advice Needed |
|
|
Guest_
|
the bar and plate one with 2inch pipes is fine for a stockish motor, also witht the 2 inch piping, wont need to chop as much to route the piping too.
With inlet/outlet piping, you have to work out if it will restict the ammount of air traveling through, too small too restirctive, too big and not enough boost = lag....
Posted on: 2007/2/23 5:15
|
|
|
|
|
Re: FREE Advice Needed |
|
Quite a regular Joined:
2005/8/3 5:06
From Middle Of Australia
Group:
Registered Users
|
Thanks for the help. I think I'll go 550x180x65 as I will be running stock with only slight modding down the track.
Posted on: 2007/2/23 5:19
|
|
_________________
Poster: sunny Date: 2007/4/7 23:40:48
we could round up all the 1200 utes that no one wants and send them to the states.
done the round up, sorry no unwanted ones here.
1200 Ute Project-CA18DET
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
