what gasket you people advice me to the a12gx head?


the stock 1200 is 1.1mm and the gx is 0,6mm.

i cant find the 0,6mm one , what can i do?

pleaaase.

americo

anyone???

Have you tried nissan for a genuine one?

See:

GX gaskets

GX gaskets

Me? I would just use the standard gasket. It should work well with regular-octane gasoline.

No problems, just give Jeff Taylor a call he will sell you a NISMO one for about $150. but I would probably just get the head shaved to true it up and use a standard head gasket at about $25.

I bought a genuine A14 gasket from nissan cost me $28. Im sure because its GX it wouldnt be too much more.

Have you tried your local parts stores?
We here in South Africa use a brand named Payon.
It is a top brand that I know is even used on BMW's.

thank you guys.

i think im gonna use the std 1200 one.

i think the head have already have been shaved.

i will post some photos soon.

I have a problem.

I think the intakes have been ported too mutch by the previously owner.
The diameter is almost the same as the valves!!! and they are BIG valves

How this GX intakes must be ported to give a good performance?

I think im gonna weld some part of the holes and port them again.

Sorry my poor vocabulary.

anyone? please