Got a few bits and pieces to get rid of. Pm me if you are interested. Preference will be given to those that can pick up.

Black glovebox lid, no latch, ok condition, not perfect. $20
Coupe type Glovebox lid in good conditionx2 $30 each
Pair of sedan rear taillight lenses in very good cond. $20
Sedan rear wiring harness with taillight plugs and bulbs, very good cond. $15
Black plastic steering column surround with no cracks or damage at all. $40
Pair of aluminium B pillar interior trims for sedan good condition, $10
Drivers(Rh) rear vision mirror in good condition. $20
A series factory steel fuel line from pump to carb.$10
Factory washer bag in working order, bit dirty but will clean up ok $30
Ute diff housing $80
A15 block and crankshaft plus rods and pistons, spun a bearing, suit rebuild. $100
good running 1200 A12, pretty fresh motor, $120
Couple of used running A12's $60 each
Will sell motor parts if required, just ask.
Ute dash minus clock $80
Coupe console, a little ratty but salvageable, $30
Silvia sr20 stock rims in very good condition, tyres stuffed, $70
Couple of very nice stock black steering wheels, $30 each
2x sedan dash facias, in good nic. $30 each
Few sets of 12 inch rims with good tyres. neg. depending on set.
14 inch x 6 inch hotwires w/195/65/14 tyres,$100
12 x 4.5 or 5 inch hotwires with tyres $120
Sedan bootlid x 2 $30/$50 no rust in either, original paint on both, one has a little hail damage.
Sedan rear doors, $30 each
Sedan rear windscreens x 2 $30 each
Sedan rear bumper needing rechrome $20

Many,Many more parts, from wiring harness sections to interior bits to suspension and brake parts. Many small bits that would be hard to find.
I will consider reasonable offers. pm me if you are after something in particular.

good running 1200 A12, pretty fresh motor, $120 is that a complete car just a motor lol

Ive chipped guy in the past for advertising what seems high...however with the way things are at these days like people spending $625,000 AU on a GT falcon I reckon $120 isnt bad for an A12

Dude do you even own a 1200 or a datsun at all? I'll give you 120 bucks for it ok.
If you aren't interested then dont bother posting, if you even had a car to put it in you would know that 120 bucks is cheap for a basically new motor. Weren't you asking 800 bucks or something silly for a bare chev block?

Hey Carjunkie, I am after a front seat. Would you sell one on it's own?

spenc mate, had a few too many sunday arvo beers aye?
$120 for a good A12 is'nt bad money keep in mind, carjunkie also said he was open to reasonable offers.

hey mate would you be able to send me some pics of the coupe console - 30$ asap to littledrumaboy@hotmail.com thanks

hey mate i am really interested in the good condition A12 for $120. Where abouts are you located in brisbane.
I can pick up ASAP
Thanks heaps
You have PM too
Do you have a phone number i can ring you on?

hey mate im interested in the pair of datsun ute axles for $80.

i was just wondering if the spline, where the axle goes into the diff is 23 millimetres in diameter? Also where are you situated?

cheers

karl

Ok, firstly i dont want to sell the interior set of seats seperately, but i do have a saas fixed back bucket in good nic, or i have a couple of ute seats as well.
Secondly i will be able to do some photos of the console maybe tomorrow, but you will have to add me on msn cause thats the only way i can send pics for some reason.
Lastly the axels are axels out of a h165 ute diff and if you need them for a ute then these will do the job unless you have a really early ute(early 70's) or you have swapped the rear axel to something else. If you are still unsure send me a pm telling me the year of your ute and i will let you know if they fit.

no wat i meant is that a car or just amotor cause i thought $120 was prity cheap for a whole car except for the 120y i got the other day for free lol and yes i do have a datto iv got 2 a 1200 coupe and a 120y