Not a lot of progress but back up to the rear shed for painting before it gets too cold cut more out of the front radiator support to fit a radiator (still investigating) and back on the rotisserie.
Getting the hang of the mig on some minor rust repairs - they still needed a quick grind

Attach file:

---

  Welding1.jpg (69.98 KB)


  Welding2.jpg (117.75 KB)


  back on the rotisserie.jpg (141.30 KB)


  back on the rotisserie1.jpg (91.30 KB)

Almost finished the paint
…. ran out of thinners after the first coat of clear

Engine bay will need to wait till I get a suitable radiator and weld in supports to suit. but at least the rest is sorta done

Attach file:

---

  paint3.jpg (100.28 KB)


  paint2.jpg (97.06 KB)


  paint1.jpg (92.62 KB)

Paint all done now to think about the road noise
Bought 3 packs of sound deadener (an extra one to be on the safe side) .... still not enough!
I need another pack to do the rest and the inside of the door skins

Attach file:

---

  dead back.jpg (182.87 KB)


  dead front.jpg (187.85 KB)


  dead roof.jpg (151.42 KB)

Progress is looking fantastic

Can't believe it's been 9 months well progress has been slow as I am renovating a house that we bought.
It's back in the workshop on the hoist, Superfatto coilovers installed, R31 rear axle installed, brakes all hooked up but no fluid in yet
Engine and g'box installed, inlet and exhaust still to hook up.
No wiring sorted out but plans to rear mount the battery and possibly the ECU

Here's some random photos

Attach file:

---

  20240614_122813.jpg (187.11 KB)


  20240614_123248.jpg (194.98 KB)


  20240614_123339.jpg (186.25 KB)


  20240614_125347.jpg (192.70 KB)


  20240614_125411.jpg (181.33 KB)

Looking very good. That R31 rear axle looks great

Hard to believe this is the same car