User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





turbo camshaft Duration and valve lift lobe center?
Just popping in
Joined:
2008/6/5 21:58
From Puerto Rico
Group:
Registered Users
Posts: 12
Offline
Hello everyone, what kind of camshaft Spec. can I use in a Turbo A15 or A14 engine? It's my first time ordering a turbo camshaft is stock bore at: 9.0:1(135psi) compression Ratio Fuel injection reprograming ECU system turbo is 50/48mm. Thaks you for you Help

Regards, Dariel

Posted on: 8/6 0:38

Edited by donditaa on 2021/8/6 1:28:41
Edited by donditaa on 2021/8/6 2:29:11
Transfer the post to other applications Transfer


Re: turbo camshaft Duration and valve lift lobe center?
Moderator
Joined:
2001/5/3 7:04
From Hawaii, USA
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31103
Offline
There are two kinds of "turbo" grinds: old school and modern. Old school makes 150HP from an A15, while modern can make 225HP

If you telephone a cam grinder you can get the latest information. For example fax Iskenderian at 310-515-5730

For old school, the Camtech A15 Turbo grind was 246/239 degrees advertised and 113 lobe separation

Posted on: 8/8 1:18
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]