Old A13

(Difference between revisions)

Revision as of 12:39, 1 December 2015

A13 (1974) - the First Tall-Deck A Engine

Overview

The 1974 A13 is a 1288cc engine with 73mm bore like the A10 and A12 before it, but with stroke increased to 77mm. It was used in the 1974 USA B210, and was a tall-deck engine that proceeded the A14 by one year. This one-year-only model was designed for the American market, to keep the same relative performance with new B210 which was considerably heavier than the B110. Compression ratio reduced to 8.5:1 to help meet US emission control standards, yet the increased displacment resulted in 75hp. To accomodate the longer stroke, the 1974 A13 features a "tall-block" casting with a deck height 15 mm (0.59 inch) higher than previous A-series engines.

The 1974 A13 is a 1288cc engine with new tall-deck block casting. It has 73mm bore like the A10 and A12 before it, but with stroke increased to 77mm. This one-year-only model was designed for the American market, to keep the same relative performance with new B210 which was considerably heavier than the B110. Compression ratio reduced to 8.5:1 to help meet US emission control standards, yet the increased displacment resulted in 75hp. To accomodate the longer stroke, the 1974 A13 features a "tall-block" casting with a deck height 15 mm (0.59 inch) higher than previous A-series engines.

Applications:
* 1974 Datsun B-210 (USA and Canada)

Applications

1974 Datsun B210 (USA and Canada)
75 HP @ 6000 RPM 

HLB210
H = highline engine
L - Left hand drive

full

Horsepower

75 HP @ 6000 RPM (SAE)

Photo Index

Nissan A Engines: Overview | A10 | A12 | A12A | A13, old | A13, new | A14 | A15