User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Headlight Aiming

From Datsun 1200 Club

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy
Categories: Body Electrical System | Maintenance And Daily Care

For your headlamps to work at full potential -- whether stock or high power -- they must be aimed correctly.

Procedure

With your 1200 on a flat, level surface, point the headlights at a wall 25 feet (8 meters) in front. Mark the wall with tape at the same height as the center of the headlights.

  • The center of the low-beam light should be 2" (2.5 cm) below this light, and a little to the right (for countries that drive on the right side of the road) or to the left (for countries that drive on the left).
  • The center of the High-beam lights should be centered on the line.

Turn the adjusting screws to adjust the beam left-right or up-down.
26846.jpgAlbum click to view

For more details, see Don's Lights: aiming 

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=Headlight_Aiming"

This page has been accessed 4,079 times. This page was last modified 05:14, 8 October 2017. Content is available under Datsun 1200 Club.