User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Heater

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Body Electrical System

Revision as of 08:10, 22 April 2010
ddgonzal (Talk | contribs)
(->Heater Hoses)
<- Previous diff
Revision as of 05:27, 12 June 2010
ddgonzal (Talk | contribs)
(->Heater Hoses)
Next diff ->
Line 144: Line 144:
** 27070-H5000 CONNECTOR-WATER RETURN 8110- ** 27070-H5000 CONNECTOR-WATER RETURN 8110-
* 27022-H1000 HOSE-WATER * 27022-H1000 HOSE-WATER
 +*: [http://datsun1200.com/modules/myalbum/photo.php?lid=22104 http://datsun1200.com/modules/myalbum/photos/thumbs/22104.jpg]
* 27017-B8520 COCK ASSY-FRONT HEATER * 27017-B8520 COCK ASSY-FRONT HEATER

Revision as of 05:27, 12 June 2010

Heater was optional in the Standard model for most countries. All USA models came with a heater (by law).

CO-01_01_th.JPG
Coolant Flow to Heater

Contents

Operation

USA 1972 Owners manual (see pages 18-19 for details):


00_cover.jpg 18.jpg 19.jpg

Comfort and Convenience

TIP: Pull heater level out to switch fan speeds.

Also see: Ventilation

7561.jpg 7562.jpg 14595.jpg 18712.jpg 20399.jpg 21272.jpg

Heater Inspection

Heater core:

  • Leaks (before removing, check for leaks in passenger area, under carpet, on firewall cardboard, etc)
  • Flow (ensure it is not plugged). You can test similar to radiator blocked test
  • Clean out debris in exterior of core

Hoses: Check for cracks, overly soft hoses, tight clamps

Flow valve: ensure it opens & closes easily through entire range. Also check linkage for easy and complete movement (before taking apart)

Air ducts: Ensure they are clean and connected properly

Electrical: Ensure fan spins at both High & Low speed

Coolant Thermostat: Test


Heater Cock

19456.jpg 19455.jpg

also see: photo gallery

Part Numbers

Heater cock

  • X2160-30600, X2161-30600 ASSY-VALVE WATER CONTROL B110 USA $18 USD
  • 27017-B8520 COCK- ASSY-FRONT HEATER 7510- B120


B120 Sunny Truck18257.jpg

B110 Coupe/Sedan 19457.jpg


B210

  • 27017-H5000 B210
  • 27017-N5000 B210 w/Aircon


Compare to other similar units:

  • Datsun 240Z
    th_Heatercock70-73240Z.jpg

Core

The heater core is like a small radiator. The heater fan removes heat and blow it into the passenger compartment.

21045.jpg


Part Numbers

Same part number 1970-1994 1200 sedan/ute/coupe JDM and USDM markets.

  • 27013-H1001 CORE ASSY-FRONT HEATER
    21046.jpg

B210 is 27013-H5000, so a different part.

Heater Hoses

The heater hoses are 1/2 inch inside diameter hose. However, the original Nissan hoses were thin wall. Standard 1/2 inch hose is thick wall and will work but has to be forced through the firewall grommets.

Also, the original Nissan thin-wall hoses had a braided cover like this:
1894.jpg
Original long heater hose is braided. Compare to the rear heater hose, which has been replaced with a plain hose.

Outlet (long) heater hose
4847.jpg 7891.jpg

Outlet Connector (fits in between the two lower radiator hoses):
21794.jpg

  • 27051-E0100 CLIP-WATER (2) [for radiator hoses]
  • 08723-12000 CLAMP-HOSE (1) [for heater hose]


Inlet connector fitting (back of cylinder head)
174_4bcd2a0ee94ff.jpg

  • 27021-H1000 HOSE-WATER [to outlet, front of engine] $7.50
    • 27078-B2000 CLIP (2) [Fixing hose to air cleaner bracket]
    • 08510-51012 SCREW-TAPPING (2)
    • 08915-43510 WASHER-PLAIN (2)
  • 27075-H1000 CONNECTOR-WATER OUTLET [lower radiator hose T-connector] $9.97
  • 27070-H1000 CONNECTOR-WATER INLET [rear of cylinder head] $4.13
  • 27020-G1900 27020-H1000 HOSE-WATER [from inlet to cock] $9.88
  • X2160-30503 HOSE-WATER [from cock to core] $11.13
  • B7017-B8500 X2161-30600 X2160-30600 ASSY-VALVE WATER CONTROL $18.17
  • 27363-18200 27363-18001 GROMMET-HEATER (2) $0.53
  • 08723-12000 CLAMP-HOSE (5) $2.40
  • 08723-13600 CLAMP-HOSE (2) $2.57 [fixing hose to cock]

Complete set is about $80: 21501-H1000,21506-H1101,B7017-B8500,27022-H1000,27020-G1900,27075-H1000,B7021-H1002,27363-18001,01555-00841,01555-00281,27070-H1000

21820.jpg

Late from Oct 1989

  • 92402-95W00 HOSE-FRONT HEATER, 5 [outlet (long) hose] NICHIRA B517
  • 27363-18200 GROMMET-RUBBER (2)
  • 01555-00221 CLAMP (4) 8910-
  • 92520-G1900 [for rear portion of hose]
    • 08120-61228 BOLT
  • 92520-G1900 CLAMP 9810- [for strut tower]
    • 08543-61012 SCREW
  • 27078-B2000 CLAMP [to air cleaner bracket]
    • 08110-61610 BOLT
    • 08911-10637 NUT


B120 early to Oct 1989

  • 92402-G1900 HOSE-FRONT HEATER, 5 NICHIRA B517
    • supercedes 92402-G1601, 92402-G1660, 92402-G1661
  • 27363-18200 GROMMET-RUBBER (2)
  • 08723-12000 CLAMP (3) -8910
  • 08723-12200 CLAMP (1) -8910
  • 01553-00013 CLAMP -8910 [clamp to hot air tube]
  • 27078-B2000 CLAMP [to air cleaner bracket]
    • 08110-61610 BOLT
  • 9330.jpg
    Mid-year B120.
    • 1. Inlet hose 4
    • 2. Outlet hose 5
    • 3. Outlet hose connects to block water pipe


B120 Inlet Hose

  • 27020-H1000 HOSE FRONT HEATER, 4 [inlet (short) hose] 7510-8109
  • 27070-H1000 CONNECTOR-WATER RETURN 7510-8109
  • 27020-G1900 HOSE FRONT HEATER, 4 [inlet (short) hose] 8110-
    • 27070-H5000 CONNECTOR-WATER RETURN 8110-
  • 27022-H1000 HOSE-WATER
    22104.jpg
  • 27017-B8520 COCK ASSY-FRONT HEATER

Removal

Heater was optional. If you wish to remove the heater, how is it done?

  1. Drain engine coolant
  2. Remove heater hose from the fitting behind the cylinder head and plug this fitting
  3. Remove heater hose from the lower radiator hose tee. Plug this fitting
  4. Remove heater from inside car

You can either remove the fitting from the back of the head & put a plug in there, or get heater blank off rubbers & plug them both. You can get these from local Auto stores, it is 1/2" heater hose.
20668.jpg
Heater hose plug for cylinder head (as fitted to no-heater models)

Or the simpler way: Run a new longer hose from front to back of engine.

Discussion: A-series heater removal