![[Datsun 1200 encyclopedia]](/wiki/upload/wiki.png)
| Revision as of 17:55, 26 September 2018 ddgonzal (Talk | contribs) (->CAD files) <- Previous diff |
Revision as of 18:08, 26 September 2018 ddgonzal (Talk | contribs) (->Dimensionalized Prints) Next diff -> |
||
| Line 25: | Line 25: | ||
| * [https://onedrive.live.com/redir?resid=1574CD977B5E321F%2132801 DXF File for Round-port manifold] | * [https://onedrive.live.com/redir?resid=1574CD977B5E321F%2132801 DXF File for Round-port manifold] | ||
| * [https://onedrive.live.com/redir?resid=1574CD977B5E321F%2132800 DXF File for Oval-port manifold] | * [https://onedrive.live.com/redir?resid=1574CD977B5E321F%2132800 DXF File for Oval-port manifold] | ||
| + | |||
| + | {{UploadPost|18181_572789971c0a6.jpg||477629}} | ||
| == Dimensionalized Prints == | == Dimensionalized Prints == | ||
| - | Dimensionalized prints of the port and bolt-hole locations can be found '''[http://datsun1200.com/modules/newbb/viewtopic.php?post_id=477629#forumpost477629 here]''' | + | NOTE: The port sizes are extra large in these prints. |
| + | |||
| + | Dimensionalized prints of the port and bolt-hole locations can be found '''[{{Post|477629}} here]''' | ||
| {{Photo!|OvalPort_5Piece.jpg}} {{Photo!|RoundPort_5Piece.jpg}} | {{Photo!|OvalPort_5Piece.jpg}} {{Photo!|RoundPort_5Piece.jpg}} | ||
| + | |||
| + | {{Upload|18181_572789a94049c.jpg||477629}} | ||
| = Studs = | = Studs = | ||
Revision as of 18:08, 26 September 2018
Contents |
Also See
Intake Manifold |
Exhaust Manifold |
Aftermarket manifold for SUs, Webers, etc.   |
EFI Manifold  |
Turbo exhaust manifolds  |
Headers/Extractors  |
Flanges
http://www.kemotorsport.com Datsun A-series Flanges round/oval $65set posted
CAD files
NOTE: The ports in the CAD files are extra large
Dimensionalized Prints
NOTE: The port sizes are extra large in these prints.
Dimensionalized prints of the port and bolt-hole locations can be found POST here
Studs
MANIFOLD 08911-10810 NUT CYLINDER HEAD TO MANIFOLD [M8] (9) 08915-13810 WASHER-LOCK [M8] (9) New-style (all A14/A15 and A12.7908-) take 2 additional
- Note: the bottom row of nuts is normally not visible
- Old-style Manifold 5 bolts across the top
- new-style Manifold 7 bolts across the top
Stud Length
* 28 mm
1 45mm (EGI manifold)
2 40mm (EGI manifold)
STUDS 08213-82810 STUD-MANIFOLD M8 x 28 (9) B120 7808- (new style) 08223-82810 M8 x 28 top(first, middle, last) bottom(first, last) (5) 08223-83510 M8 x 35 top(second) 08223-83210 M8 x 32 top(third, fifth) (2) 08223-82810 M8 x 28 8910- 08223-84010 M8 x 40 top(sixth) 08223-83510 M8 x 35 8910- 08223-82810 M8 x 28 bottom(middle two) (2) 14065-W1300 8910-
NOTE: non-1200 manifolds take differing numbers and lengths of studs
¤