Manifold

(Difference between revisions)

Revision as of 00:18, 2 November 2019

Also See

Port Sizes

Intake Manifold

Exhaust Manifold

Aftermarket manifold for SUs, Webers, etc.

EFI Manifold

Turbo exhaust manifolds

Headers/Extractors

Flanges

http://www.kemotorsport.com Datsun A-series Flanges round/oval $65set posted

CAD files

NOTE: The ports in the CAD files are extra large
NOTE2: There are RH and LH versions of the flanges

• DXF File for Round-port manifold
• DXF File for Oval-port manifold

Post 477629 Post 492986

Dimensionalized Prints

NOTE: The port sizes are extra large in these prints.

Dimensionalized prints of the port and bolt-hole locations can be found ^POST here

Post 477629

Studs

MANIFOLD
08911-10810 NUT CYLINDER HEAD TO MANIFOLD  [M8] (9)
08915-13810 WASHER-LOCK [M8] (9)
New-style (all A14/A15 and A12.7908-) take 2 additional

• Note: the bottom row of nuts is normally not visible
• Old-style Manifold 5 bolts across the top
• new-style Manifold 7 bolts across the top

Upload click to view

Stud Length

* 28 mm
1 45mm (EGI manifold)
2 40mm (EGI manifold)

STUDS
08213-82810 STUD-MANIFOLD M8 x 28 (9)
B120 7808- (new style)
  08223-82810 M8 x 28 top(first, middle, last) bottom(first, last) (5)
  08223-83510 M8 x 35 top(second)
  08223-83210 M8 x 32 top(third, fifth) (2)
    08223-82810 M8 x 28 8910-
  08223-84010 M8 x 40 top(sixth)
    08223-83510 M8 x 35 8910-
  08223-82810 M8 x 28 bottom(middle two) (2)
    14065-W1300 8910-

NOTE: non-1200 manifolds take differing numbers and lengths of studs