Revision as of 06:30, 11 January 2012 ddgonzal (Talk | contribs) <- Previous diff |
Revision as of 05:12, 6 April 2013 ddgonzal (Talk | contribs) Next diff -> |
||
Line 1: | Line 1: | ||
- | [[Category:Front Axle And Front Suspension]] | + | The wheel bearings require lubrication every two years or so. |
- | [[Category:Brake System]] | + | |
- | = Front = | + | = Front Wheel Bearings = |
- | Bearings for drum hub and disc hub are the same. | + | The front wheel bearings fit in the [[Hub]]. Bearings for drum hub and disc hub are the same. |
+ | <center><blockquote><table border=1><tr><td> | ||
+ | 1972 USA Owners manual (Page 34): | ||
+ | <br>[http://s297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1972/34.jpg http://s297.photobucket.com/albums/mm219/ddgonzal/Datsun%201200/owners_manual/1972/th_34.jpg]<blockquote>Check & retighten suspension parts ... Repack wheel bearing grease</blockquote> | ||
+ | </td></tr></table></blockquote></center> | ||
+ | |||
+ | == Tightening == | ||
+ | 1. Tighten large nut moderately hard, while spinning the hub. Use pliers and not a socket so that the nut is not tightened to excess. | ||
+ | |||
+ | 2. Back off on the nut, then tighten very lightly. | ||
+ | |||
+ | == Packing == | ||
+ | You can buy a special tool to pack the wheel bearing with new grease, but many of us find it is just as easy to do by hand. | ||
+ | |||
+ | [http://datsun1200.com/modules/myalbum/photo.php?lid=15282 http://datsun1200.com/uploads/thumbs/15282.jpg] | ||
+ | |||
+ | Covering the hand with a plastic bag makes it neat and clean. | ||
+ | |||
+ | If evidence of an external grease leak is seen, fit a new wheel bearing seal: | ||
+ | <br>[http://datsun1200.com/modules/myalbum/photo.php?lid=9446 http://datsun1200.com/uploads/thumbs/9446.jpg] | ||
+ | |||
+ | == Part Numbers == | ||
[http://www.rockauto.com/catalog/x,carcode,1208483,parttype,1672 RockAuto.com] | [http://www.rockauto.com/catalog/x,carcode,1208483,parttype,1672 RockAuto.com] | ||
== Outer == | == Outer == | ||
- | 42mm O.D. Type 30302 | + | 42mm O.D. Type 30302 |
- | + | * 40215-H1000 ASS'Y-BEARING-front wheel, outer | |
- | * 40215-H1000 ASS'Y-BEARING-front wheel, outer | + | * 40215-H1000 ASSY-BEARING FRONT WHEEL OUTER from 0570 |
- | * 40215-H1000 ASSY-BEARING FRONT WHEEL OUTER from 0570 | + | * 40215-18000 ASSY-BEARING FRONT WHEEL OUTER to 0470 |
- | * 40215-18000 ASSY-BEARING FRONT WHEEL OUTER to 0470 | + | |
[http://datsun1200.com/modules/myalbum/photo.php?lid=19999 http://datsun1200.com/uploads/thumbs/19999.jpg] | [http://datsun1200.com/modules/myalbum/photo.php?lid=19999 http://datsun1200.com/uploads/thumbs/19999.jpg] | ||
- | * BCA/Timken/National 30302 | + | * BCA/Timken/National 30302 |
- | * Taper Bearing Assembly | + | * Taper Bearing Assembly |
- | ** Bore=0.5906" | + | ** Bore=0.5906" |
- | ** Outer Diameter=1.6535" | + | ** Outer Diameter=1.6535" |
- | ** Width=0.561" | + | ** Width=0.561" |
- | ** Cone Length=0.5118" | + | ** Cone Length=0.5118" |
- | ** Cup Length=0.4331" | + | ** Cup Length=0.4331" |
- | ** Cone Radius=0.06" | + | ** Cone Radius=0.06" |
- | + | Interchange | |
- | Interchange | + | * 1957-1967 Fiat 500/600 |
- | * 1957-1967 Fiat 500/600 | + | * 1976-1978 Datsun F10 |
- | * 1976-1978 Datsun F10 | + | * 1981-1995 Suzuki, various models |
- | * 1981-1995 Suzuki, various models | + | |
== Inner == | == Inner == | ||
- | 52 mm O.D. Type 30305 | + | 52 mm O.D. Type 30305 |
+ | * 32351-M5100 ASS'Y-BEARING-front wheel, inner | ||
+ | ** Part 40210-H1000 is superseded by 32351-M5100 | ||
+ | ** 40210-H1000 ASSY-BEARING FRONT WHEEL INNER from 0570 | ||
+ | ** 40210-18000 ASSY-BEARING FRONT WHEEL INNER to 0470 | ||
- | * 32351-M5100 ASS'Y-BEARING-front wheel, inner | + | Aftermarket |
- | ** Part 40210-H1000 is superseded by 32351-M5100 | + | * SKF BR30205 |
- | ** 40210-H1000 ASSY-BEARING FRONT WHEEL INNER from 0570 | + | * Beck/Arnley 051-3809 0513809 |
- | ** 40210-18000 ASSY-BEARING FRONT WHEEL INNER to 0470 | + | * Timken 30205M |
+ | * BCA/NATIONAL 30205 | ||
+ | * 000720030205, 0009813705, 0059819105, 0059819205, 0069813605, 025933047, 0259330470, | ||
+ | 0857591700, 11040, | ||
+ | 1450481, 1522731, 183682, 18524, 26799930, 290062202, 31422345289, 33121451188, 40210H1000, | ||
+ | 6601141, 7703090268, 7730205, 89459, 90005900200, 906100005, 9760030205, 9760930205, | ||
+ | 9985014, A710X1200ABA, AK2508906, C5NN7N044A, C5NN7N047A, C5NN7N048A, E5TZ7065A, N035160, | ||
+ | S08333075, T3090268, T7730205 | ||
- | Aftermarket | + | Interchange |
- | * SKF BR30205 | + | * Datsun B10, B110, B210, B310, 520/521, 620 -1974, N10 |
- | * Beck/Arnley 051-3809 0513809 | + | * 1971-1993 Mazda, various models |
- | * Timken 30205M | + | * 1971-1983 Renault, various models |
- | * BCA/NATIONAL 30205 | + | * 1971-1972 Peugeot 304 |
- | * 000720030205, 0009813705, 0059819105, 0059819205, 0069813605, 025933047, 0259330470, 0857591700, 11040, 1450481, 1522731, 183682, 18524, 26799930, 290062202, 31422345289, 33121451188, 40210H1000, 6601141, 7703090268, 7730205, 89459, 90005900200, 906100005, 9760030205, 9760930205, 9985014, A710X1200ABA, AK2508906, C5NN7N044A, C5NN7N047A, C5NN7N048A, E5TZ7065A, N035160, S08333075, T3090268, T7730205 | + | * 1987-1994 Subaru Justy |
+ | * N10 transmission bearing MT.F5 A-series | ||
+ | * 1979-1982 Chevrolet/Isuzu Luv Pickup | ||
+ | * 1990-1992 Daihatsu Rocky | ||
+ | * 1974-1991 Chrysler/Mitsubishi, various models | ||
+ | * 1989-1993 Dodge Truck D250/D350/W350 | ||
+ | * 1984-1987 Hyundai, various models | ||
+ | * 1950-1965 Volkswagen | ||
+ | * 1958-1961 Simca, various models | ||
+ | * 1954-1959 Panhard Dyna | ||
+ | * 1960-1962 Panhard PL-17 | ||
+ | * 1991-2010 Mitsubishi, various models | ||
+ | Specifications | ||
+ | * Cone radius=0.0394" | ||
+ | ** Standout=0.1280" | ||
+ | ** Outside diameter=2.0470" | ||
+ | ** Inside diameter=0.9840" | ||
+ | ** Cup radius=0.0394" | ||
+ | ** Cup length=0.5118" | ||
+ | ** Cone length=0.5906"; | ||
+ | ** Taper Bearing Assembly | ||
+ | ** Bore=0.9843" | ||
+ | ** Outer Diameter=2.0472" | ||
+ | ** Width=0.6398" | ||
- | Interchange | + | == Wheel Seal == |
- | * Datsun B10, B110, B210, B310, 520/521, 620 -1974, N10 | + | Nissan [[Front Axle Part Numbers|40232-18000]] SEAL-GREASE FRONT HUB (2) |
- | * 1971-1993 Mazda, various models | + | L&S Automotive Products 1174 |
- | * 1971-1983 Renault, various models | + | National 1174 |
- | * 1971-1972 Peugeot 304 | + | Victor Reinz 66539 |
- | * 1987-1994 Subaru Justy | + | |
- | * N10 transmission bearing MT.F5 A-series | + | |
- | * 1979-1982 Chevrolet/Isuzu Luv Pickup | + | |
- | * 1990-1992 Daihatsu Rocky | + | |
- | * 1974-1991 Chrysler/Mitsubishi, various models | + | |
- | * 1989-1993 Dodge Truck D250/D350/W350 | + | |
- | * 1984-1987 Hyundai, various models | + | |
- | * 1950-1965 Volkswagen | + | |
- | * 1958-1961 Simca, various models | + | |
- | * 1954-1959 Panhard Dyna | + | |
- | * 1960-1962 Panhard PL-17 | + | |
- | * 1991-2010 Mitsubishi, various models | + | |
- | Specifications | + | Specifications |
- | * Cone radius=0.0394" | + | * Material: Nitrile |
- | ** Standout=0.1280" | + | * Shaft size: 38mm (1.496") |
- | ** Outside diameter=2.0470" | + | * Housing Bore: 52mm (2.047") |
- | ** Inside diameter=0.9840" | + | * O.D.: 52.25 mm (2.057") |
- | ** Cup radius=0.0394" | + | * Width: 8.5mm (0.335") |
- | ** Cup length=0.5118" | + | |
- | ** Cone length=0.5906"; | + | |
- | ** Taper Bearing Assembly | + | |
- | ** Bore=0.9843" | + | |
- | ** Outer Diameter=2.0472" | + | |
- | ** Width=0.6398" | + | |
= Rear Wheel Bearings = | = Rear Wheel Bearings = | ||
- | See [[Axle Shaft]]. These are not easily replaced. | + | See main article: [[Axle Shaft]] |
+ | |||
+ | The rear wheel bearings are not easily replaced. Most often they can be repacked. | ||
+ | |||
+ | [[Category:Front Axle And Front Suspension]] | ||
+ | [[Category:Brake System]] |
Revision as of 05:12, 6 April 2013
The wheel bearings require lubrication every two years or so.
Contents |
Front Wheel Bearings
The front wheel bearings fit in the Hub. Bearings for drum hub and disc hub are the same.
1972 USA Owners manual (Page 34):
Check & retighten suspension parts ... Repack wheel bearing grease
Tightening
1. Tighten large nut moderately hard, while spinning the hub. Use pliers and not a socket so that the nut is not tightened to excess.
2. Back off on the nut, then tighten very lightly.
Packing
You can buy a special tool to pack the wheel bearing with new grease, but many of us find it is just as easy to do by hand.
Covering the hand with a plastic bag makes it neat and clean.
If evidence of an external grease leak is seen, fit a new wheel bearing seal:
Part Numbers
Outer
42mm O.D. Type 30302 * 40215-H1000 ASS'Y-BEARING-front wheel, outer * 40215-H1000 ASSY-BEARING FRONT WHEEL OUTER from 0570 * 40215-18000 ASSY-BEARING FRONT WHEEL OUTER to 0470
* BCA/Timken/National 30302 * Taper Bearing Assembly ** Bore=0.5906" ** Outer Diameter=1.6535" ** Width=0.561" ** Cone Length=0.5118" ** Cup Length=0.4331" ** Cone Radius=0.06"
Interchange * 1957-1967 Fiat 500/600 * 1976-1978 Datsun F10 * 1981-1995 Suzuki, various models
Inner
52 mm O.D. Type 30305 * 32351-M5100 ASS'Y-BEARING-front wheel, inner ** Part 40210-H1000 is superseded by 32351-M5100 ** 40210-H1000 ASSY-BEARING FRONT WHEEL INNER from 0570 ** 40210-18000 ASSY-BEARING FRONT WHEEL INNER to 0470
Aftermarket * SKF BR30205 * Beck/Arnley 051-3809 0513809 * Timken 30205M * BCA/NATIONAL 30205 * 000720030205, 0009813705, 0059819105, 0059819205, 0069813605, 025933047, 0259330470, 0857591700, 11040, 1450481, 1522731, 183682, 18524, 26799930, 290062202, 31422345289, 33121451188, 40210H1000, 6601141, 7703090268, 7730205, 89459, 90005900200, 906100005, 9760030205, 9760930205, 9985014, A710X1200ABA, AK2508906, C5NN7N044A, C5NN7N047A, C5NN7N048A, E5TZ7065A, N035160, S08333075, T3090268, T7730205
Interchange * Datsun B10, B110, B210, B310, 520/521, 620 -1974, N10 * 1971-1993 Mazda, various models * 1971-1983 Renault, various models * 1971-1972 Peugeot 304 * 1987-1994 Subaru Justy * N10 transmission bearing MT.F5 A-series * 1979-1982 Chevrolet/Isuzu Luv Pickup * 1990-1992 Daihatsu Rocky * 1974-1991 Chrysler/Mitsubishi, various models * 1989-1993 Dodge Truck D250/D350/W350 * 1984-1987 Hyundai, various models * 1950-1965 Volkswagen * 1958-1961 Simca, various models * 1954-1959 Panhard Dyna * 1960-1962 Panhard PL-17 * 1991-2010 Mitsubishi, various models
Specifications * Cone radius=0.0394" ** Standout=0.1280" ** Outside diameter=2.0470" ** Inside diameter=0.9840" ** Cup radius=0.0394" ** Cup length=0.5118" ** Cone length=0.5906"; ** Taper Bearing Assembly ** Bore=0.9843" ** Outer Diameter=2.0472" ** Width=0.6398"
Wheel Seal
Nissan 40232-18000 SEAL-GREASE FRONT HUB (2) L&S Automotive Products 1174 National 1174 Victor Reinz 66539
Specifications * Material: Nitrile * Shaft size: 38mm (1.496") * Housing Bore: 52mm (2.047") * O.D.: 52.25 mm (2.057") * Width: 8.5mm (0.335")
Rear Wheel Bearings
See main article: Axle Shaft
The rear wheel bearings are not easily replaced. Most often they can be repacked.