[< Previous 343 344 345 346 347 348 349 Next >]
a14 auto to manual
 DatsunSSS  2006/7/4 0:45  Tell a friend
 3008  4  0.00 (0 votes)
my a12 flywheell doesnt fit the a14 crankshaft, why?????
everybody does thid transformation , why i cant???? |
|
|
[< Previous 343 344 345 346 347 348 349 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| Cable_Tie |
Posted: 2006/7/4 3:42 Updated: 2006/7/4 3:42 |
Home away from home   Joined: 2004/6/4 From: Brisbane, Australia Posts: 770 |
 Re: a14 auto to manual The holes are not evenly spaced. Sit the flywheel on the crank and rotate it around slowly. You will see when it matches all holes at once.
|
|
|
|
| Poster |
Thread |
| DatsunSSS |
Posted: 2006/7/4 3:53 Updated: 2006/7/4 3:53 |
Home away from home  Joined: 2003/2/14 From: Portugal Posts: 472 |
Re: a14 auto to manual the holes are ok, but the circle around are not from the same size.
|
|
|
|
|
| Poster |
Thread |
| killer1200 |
Posted: 2006/7/4 4:25 Updated: 2006/7/4 4:25 |
No life (a.k.a. DattoMaster)   Joined: 2004/5/28 From: Adelaide, South Australia Posts: 1817 |
Re: a14 auto to manual cable is right the flywheel can only go on one way.
|
|
|
|
|
| Poster |
Thread |
| Cable_Tie |
Posted: 2006/7/4 4:32 Updated: 2006/7/4 4:32 |
Home away from home Joined: 2004/6/4 From: Brisbane, Australia Posts: 770 |
Re: a14 auto to manual Just read that it is an auto to manual swap. . . (read things people!) Check this out:  or this thread: The right is a spacer and comes off with a whackIt caught me out a while back. . . |
|
|
|
|
| Poster |
Thread |
| Gary_P |
Posted: 2006/7/4 5:40 Updated: 2006/7/4 5:40 |
Home away from home  Joined: 2003/7/13 From: Portland OR. USA Posts: 268 |
Re: a14 auto to manual Cable_Tie's got it ritht.
1st, make sure that the spacer for the automatic is off the crank.
2nd, make sure that there is a pilot bushing in the crank.
3rd, rotate flywheel untill all 6 holes line up.
4th, you may want to drill out the 6 holes in the 1200 flywheel just a bit. .5mm should be enough. 1200 flywheel bolts are 9.45mm across the threads. The A14 flywheel bolts are 9.86mm across the threads.
I had the flywheel bolts shear off when a friend was driving the converted rally car during an autocross. Didn't think an A15 with 1200GX head and SU's could survive WOT without even a flywheel... but it did. This car had a lightened 1200 flywheel on a A15. Seemed like the bolts were a bit tight going in. Had the bolts in a bind. After drilling out the flywheel holes everything bolted back together and worked for 2 more seasons of autocross.
|
|
|
|
|
| Poster |
Thread |
| DatsunSSS |
Posted: 2006/7/5 1:33 Updated: 2006/7/5 1:33 |
Home away from home Joined: 2003/2/14 From: Portugal Posts: 472 |
Re: a14 auto to manual I was looking for the "auto to manual " post but i couldn find it.
Many thanks cable_tie, it was a spacer and not a different crankshaft. lool
i dont have to drill the holes because the bolts from the b210 are from the same size.
thanks to all
americo
|
|
|
|
Misc
Tech Section