[< Previous 2408 2409 2410 2411 2412 2413 2414 Next >]
Project GX
 stirlingmac  2004/11/16 20:30  Tell a friend
 3364  3  0.00 (0 votes)
| Nismo oil pump, with cool Japanese spec filter. I found this NOS in Texas a few years back and it's finally getting bolted to the engine. |
|
|
[< Previous 2408 2409 2410 2411 2412 2413 2414 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| phunkdoktaspok |
Posted: 2004/11/17 1:14 Updated: 2004/11/17 1:14 |
No life (a.k.a. DattoMaster)   Joined: 2002/9/23 From: Posts: 2809 |
 Re: Project GX Cool explains the question i had the other week.
Do you buy any chance have pics of the high flow oil pumps you once talked of. I think you said you use 2 A series housings machined down to accept an L series rotor.
|
|
|
|
| Poster |
Thread |
| stirlingmac |
Posted: 2004/11/17 3:50 Updated: 2004/11/17 3:50 |
Home away from home   Joined: 2000/5/6 From: Wellington New Zealand Posts: 962 |
Re: Project GX I'll get some shots next time I have a camera with me. I intended to line a stock one , Nismo and a modded one for a comparison shot.
|
|
|
|
|
| Poster |
Thread |
| bobs1200 |
Posted: 2004/11/17 3:58 Updated: 2004/11/17 3:58 |
Home away from home  Joined: 1999/9/13 From: Tracy ,Ca Posts: 341 |
Re: Project GX I have one of theese pumps on my car this pump needs a one way valve on oil pick up to keep it primed. If not all the oil drains back into oil pan and takes thirty seconds or so to get oil pressure at start up. also this pump produces 100 psi
|
|
|
|
Mechanical
Engine