[< Previous 2203 2204 2205 2206 2207 2208 2209 Next >]
[< Previous 2203 2204 2205 2206 2207 2208 2209 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| clyons8 |
Posted: 2011/4/16 7:03 Updated: 2011/4/16 7:03 |
No life (a.k.a. DattoMaster)   Joined: 2007/1/22 From: East New Britain, Papua New Guinea Posts: 6981 |
 Re: Tomei dual-sidedraft manifold These are about the same depth as the ones you bought off, me. Both manifolds give a slight angle to the carbs (within carb specifications) and those rubber insulators do wonders for reducing heat transfer and vibrations transfer.
The phenolic spacers from brpo also do a great job of dropping these temperatures.
|
|
|
|
| Poster |
Thread |
| Wombat_racing |
Posted: 2011/4/16 11:40 Updated: 2011/4/16 11:40 |
Home away from home   Joined: 2004/11/27 From: Tasmania Posts: 773 |
Re: Tomei dual-sidedraft manifold I noticed in the E10 Cherry race parts book a set of these spacer that also put more angle on the carbs (for clearance).
|
|
|
|
| Poster |
Thread |
| Wombat_racing |
Posted: 2011/4/15 9:44 Updated: 2011/4/15 9:44 |
Home away from home Joined: 2004/11/27 From: Tasmania Posts: 773 |
Re: Tomei dual-sidedraft manifold Now that looks very thin. Nice bit of kit that!!!
|
|
|
|
| Poster |
Thread |
| ddgonzal |
Posted: 2011/4/16 2:07 Updated: 2011/4/16 2:07 |
Moderator   Joined: 2001/5/3 From: 48 North Posts: 31609 |
Re: Tomei dual-sidedraft manifold Another view  |
|
|
|
|
| Poster |
Thread |
| Wombat_racing |
Posted: 2011/4/16 6:36 Updated: 2011/4/16 6:36 |
Home away from home Joined: 2004/11/27 From: Tasmania Posts: 773 |
Re: Tomei dual-sidedraft manifold Do the black spacers tilt the carbys or are they just a set of spacers. Maybe looking at the other pics there not all that thin after all.
|
|
|
|
Mechanical
Engine
2006/5/29 6:29 
Tell a friend
4889 
5 
0.00 (0 votes)