[< Previous 2201 2202 2203 2204 2205 2206 2207 Next >]
GX manifold setup
 ddgonzal  2006/5/29 22:17  Tell a friend
 4826  1  0.00 (0 votes)
Part Numbers:
1. 14003-H2330 MANIFOLD-intake
2. 00933-11800 PLUG-welch 2
3. 00933-12000 PLUG-welch 1
4. 08931-30200 PLUG-taper 1
5. 14059-H2300 CONNECTOR-water hose 1
6. 08213-82810 STUD-carburetor fixing 4
7. 14004-H2300 MANIFOLD-exhaust
8. 08213-82800 STUD-fixing exhaust tube 3
9. 08911-10810 NUT-fixing manifold 11
10. 08915-13810 WASHER-lock, fixing manifold 11
11. 14037-32200 YOKE-manifold 4
12. 14035-H2300 GASKET-manifold (steel best)
13. 14055-H2300, H2301 HOSE-manifold water
14. 08723-12000 CLAMP-hose 2
15. 14330-H2300, H2301, H2302 PLATE-heat shield
16. 16174-H2300 INSULATOR-carburetor 2
17. 16175-A5100 GASKET-insulator 2
18. 11810-A3500 ASS'Y-VALVE,crank case emission control
19. 11826-H2300 HOSE-rocker cover to control valve
20. 16572-10801 CLAMP-hose
21. 16572-H1000 CLAMP-hose |
|
|
[< Previous 2201 2202 2203 2204 2205 2206 2207 Next >]
The comments are owned by the poster. We aren't responsible for their content.
| Poster |
Thread |
| 1200coupe |
Posted: 2006/6/1 4:00 Updated: 2006/6/1 4:00 |
Home away from home   Joined: 2003/9/17 From: Canberra Posts: 512 |
 Re: GX manifold setup If one of these inlet manifolds became available second hand, can anybody tell me what something like that would be worth to buy.
Thanks.
|
|
|
Mechanical
Engine