Hey guys. I've been looking for a set of replacement floors for the 1200 but can't seem to come up with anything online. The floors in my UTE were replaced at sometime but who ever did it did a hack job and riveted them in so I want to do the whole thing over and weld them in.

Any leads?

No one sells replacment floorpans for a 1200. Except Nissan South Africa.

You might be able to cut out the rusty bits and weld in some neat sections, thats what most people do as its not too hard. You might also be able to cut the floor out and get a fabrication shop to reproduce the factory floor pan. Another option is find another 1200 with a decent floor, cut it out and weld it into your car.

yeah i'd say find another car to cut the floor out of, pretty sure that any other 1200 will do the job

Thanks guys. I haven't see that many 1200's parting out over here on the east coast so the chances of me finding one with a good floor are slim. I'll probably buy replacement floors for the 240z or 510 and adapt them to the 1200.

Its a shame that most of the drag 1200's here in the US had really good chassis/floors before they were all cut up

Quote:
Are there any members on here from SA that can confirm this? I've heard of companies in SA Bakkie replacement parts/panels but haven't seen anything online.

A guy on another forum told me that in El Salvidor/South America there is a strong presence of aftermarket parts for the UTE but still haven't been able to come up with much online.

Nissan South Africa doesn't sell their parts online. You can call them, if you have a good long distance plan it won't cost much.

Remember they made utes in 2007. So they may still have some floor pans available.