Browsing this Thread:
1 Anonymous Users
|
|
CA18 and 1200 parts |
|
Home away from home  
Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
Hi guys,
I have some parts for sale, pick up preferred in Wellington Point QLD but I can post the smaller items at your cost.
All of the Datsun 1200 parts were removed from my 1980 ute.
Door trims - the boards are in pretty poor condition - $10
Z32 airflow meter with connector - I removed the screens - SOLD
T25 size turbo beanie - unused - SOLD
CA18 fuel rail with 3 injectors and FPR - $30
SR20 upper plenum with TB and ACC (items attached to plenum in photos) - SOLD
1200 door pulls - $5 each
1200 window winders - $5 each
1200 brown defrost trims - $5 each
1200 bonnet latches (upper and lower) - $10 each
Pipe to connect turbo outlet to TB on CA18 - comes with silicone hose on TB side. It has a tab on the underside to allow a bracket (not supplied) to support it from the front timing cover. A fitting has been welded near the TB side to allow for a connection to the cold start valve. You will require a 2 inch to 2.5 inch 45 degree bend to join from the turbo outlet to the pipe as seen in the photo of the pipe installed on my motor. - $50 (note that I have a T28BB of an S15 installed which may have the turbo outlet pointed in a different direction.
45 degree 35mm silicone bend - $5
70mm to 50mm silicone reducer - $5
Set of used CA18 valves - $25
CA18 valve springs and lifters - not a full set of either items - $10 for everything pictured in box.
8AN couplers - $5 each Sold
6AN oneway valves for fuel pumps - $15 each or both for $25. Sold
Turbosmart boost T - old style never used - $35
Splitfire CA18 coils - new and never used in box with instructions and harness - SOLD
1200 ute door glass - both lower support channels included but one has been removed, i would suggest removing the other and treating the surface rust on both before refitting to the glass with silicone or purchasing new rubbers - $50 each side.
Feel free to ask any questions.
Cheers
Nathan
Posted on: 2015/7/7 0:13
Edited by ___1200ute on 2015/7/17 0:02:26
Edited by ___1200ute on 2015/7/21 0:05:00
Edited by ___1200ute on 2015/7/21 0:06:25
Edited by ___1200ute on 2015/7/23 3:18:44
|
|
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
Additional photos which didn't upload previously.
Posted on: 2015/7/7 0:16
|
|
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
Any interest? I'm heading to Perth tomorrow morning and can take any of the items with me if requested tonight.
Posted on: 2015/7/13 5:15
|
|
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2012/11/16 10:46
From Port Douglas. QLD
Group:
Registered Users
|
Hey,
have pm you
Posted on: 2015/7/13 11:38
|
|
_________________
1200 ute
ca18det
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2012/11/16 10:46
From Port Douglas. QLD
Group:
Registered Users
|
z32 and coils please
Posted on: 2015/7/13 11:44
|
|
_________________
1200 ute
ca18det
|
|
|
Re: CA18 and 1200 parts |
|
Just can't stay away  Joined:
2011/2/8 2:52
From Newcastle, Australia
Group:
Registered Users
|
pm sent
Posted on: 2015/7/13 12:22
|
|
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
PMs replied to.
Posted on: 2015/7/13 22:35
|
|
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
Turbo beanie and SR20 upper plenum are sold - first post updated.
Posted on: 2015/7/17 0:03
|
|
|
|
|
Re: CA18 and 1200 parts |
|
Home away from home Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
First post updated with items sold.
Posted on: 2015/7/23 3:19
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
IMG_2740.jpg (94.65 KB)
Transfer
