User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Re: need some help!!!!!!
Home away from home
Joined:
2005/12/7 4:37
From Bendigo, Victoria, Australia.
Group:
Registered Users
Posts: 781
Offline
Quote:
5000 rpm at 100kph is a bit high too. A new diff ratio might help. Your ute should be 4.11:1 but it may have a sedan centre in it 3.9:1.


yeh all utes have the 4.11:1 centre in them (if it was made after 1974...)

the sedan diff centre is not interchangeable with the ute one, from memory i think the sunny, or maybe a bluebird (or some other car) had a H165 at 3.9:1? can some1 confirm this?
anyway if it had a 3.9 then it would rev less.

i would replace all the rubber hoses that carry fuel to the engine and rebuild the carby, setting float levels and that again.
then new set of plugs followed by a check of the base timing.
new air filter will help dramatically too.




Posted on: 2007/6/5 5:20
_________________
"Like a Rolling Stone"
Bob Dylan

New Daily: <<<<Now For Sale.
1972 B110, 13" Bathurst mags, airbrus
Transfer the post to other applications Transfer

Subject Poster Date
     need some help!!!!!! mattyk 2007/6/3 8:22
       Re: need some help!!!!!! Rallytwit 2007/6/4 19:14
       Re: need some help!!!!!! datosun 2007/6/5 2:13
         Re: need some help!!!!!! TnPshow 2007/6/5 3:13
           Re: need some help!!!!!! Mat_1200ute 2007/6/5 3:16
           Re: need some help!!!!!! Ronald 2007/6/5 5:20
             Re: need some help!!!!!! TnPshow 2007/6/5 5:27
               Re: need some help!!!!!! mattyk 2007/6/5 8:23




You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]