User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


EOI a12 turbo injection setup
No life (a.k.a. DattoMaster)
Joined:
2003/1/5 5:40
From campbelltown (sydney) australia
Group:
Registered Users
Posts: 1802
Offline
hi guys just getting an idea for a friend of wat people may pay for a turbo a12 with a14 head with custom efi setup and gtir t28 turbo.this setup is currently runing and has microtech lt10s computer and quad coils falcon t/b 550cc injectors 3 inch dump pipe front mount ported head fuel pumps surge tank basically everything to run it. currently goes ok but needs to have an a14/15 under it as the turbo is a bit big i think thats why the builder put a a14 head so it could be done later, the engine itself runs very smoothly with no issues at all. if anyone has any ideas what it may be worth considering the potential let us know and please no stupid prices its worth alot i will post pics as well.
reason for selling is he wants to build a big n/a motor.

Open in new window

Posted on: 2009/1/8 11:57
_________________
* caution, sunglasses must be worn to view my ca18det *
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
Quite a regular
Joined:
2008/8/4 4:02
From Sydney
Group:
Registered Users
Posts: 68
Offline
BUMP

Posted on: 2009/1/11 2:31
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
Home away from home
Joined:
2006/6/6 13:42
From Melbourne
Group:
Registered Users
Posts: 497
Offline
pm sent

Posted on: 2009/1/11 3:03
_________________
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Would $3500 be a stupid price or just high or low?

New parts would cost more I'm sure.

Posted on: 2009/1/11 3:45
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
No life (a.k.a. DattoMaster)
Joined:
2006/6/8 10:52
From Brisvegas, oz
Group:
Registered Users
Posts: 2173
Offline
what power did it produce? i would say over 4000 and if it got over 120kwatw i would even say 5000

Posted on: 2009/1/11 4:40
_________________
www.camerasplus.com.au
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
No life (a.k.a. DattoMaster)
Joined:
2003/1/5 5:40
From campbelltown (sydney) australia
Group:
Registered Users
Posts: 1802
Offline
Not sure its never been dynoed but its got a bit of lag because the turbos too big for itQuote:

frankthedolphintrainer wrote:
what power did it produce? i would say over 4000 and if it got over 120kwatw i would even say 5000

Posted on: 2009/1/11 6:06
_________________
* caution, sunglasses must be worn to view my ca18det *
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
Home away from home
Joined:
2003/2/25 7:08
From adelaide
Group:
Registered Users
Posts: 466
Offline
Stuffs only worth what people will pay, as an example i struggled to sell my old 1200 for 2k complete but with a blown gasket, with 2L L series, haltech e6x, wrx turbo, fmic, ported etc head,full 3inch exh, fresh motor, ceramic clutch, 280zx 5 spd etc etc. Car was rough body wise but full of $$$ parts. Granted it was more of an oddball setup and his manifolds etc look top notch but id be suprissed if he gets more than 2-2.5k for the lot.

Posted on: 2009/1/11 6:41
_________________
1200 restoration project moving slower than it actually is
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
No life (a.k.a. DattoMaster)
Joined:
2003/1/5 5:40
From campbelltown (sydney) australia
Group:
Registered Users
Posts: 1802
Offline
Bump

Posted on: 2009/1/13 11:09
_________________
* caution, sunglasses must be worn to view my ca18det *
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
Just can't stay away
Joined:
2008/5/15 14:10
Group:
Registered Users
Posts: 134
Offline
ill give u 2 grand =]

Posted on: 2009/1/16 23:17
Transfer the post to other applications Transfer


Re: EOI a12 turbo injection setup
No life (a.k.a. DattoMaster)
Joined:
2004/2/14 6:21
From Coondle, WA Australia
Group:
Registered Users
Posts: 2256
Offline
Quote:
by sikdatto1200 on 2009/1/11 14:41:17

Stuffs only worth what people will pay, as an example i struggled to sell my old 1200 for 2k complete but with a blown gasket, with 2L L series, haltech e6x, wrx turbo, fmic, ported etc head,full 3inch exh, fresh motor, ceramic clutch, 280zx 5 spd etc etc. Car was rough body wise but full of $$$ parts. Granted it was more of an oddball setup and his manifolds etc look top notch but id be suprissed if he gets more than 2-2.5k for the lot.


I would agree with that. I know it seems mean, you can only expect to get around 50% on cars. So even if its a $4000 setup, $2000 is probally reasonable.

Its a pity its for that new fangled pogostick stuff. I might be intrested if it was for a real car!

Posted on: 2009/1/17 9:49
_________________
EARTH FIRST! - We can mine the other planets later...'
'69 Blue 4 door Project Daisy (http://www.datsun1000.com/TopicView.asp?TopicID=668)
(https://pcmhacking.net/forums/viewtopic.php?f=15&t=5640)
(http://mx5cartalk.com/forum/viewtopic.php...
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]