hey guys I'm looking to buy an A15 head let me know if you have one.

What year? There are several heads used by A15, all of which more commonly found on A14s.

If this the head you have now?


... that is an A15 head. 1981-1982 H95 cylinder head.

haha thanks you should me a pic of my engine :) but yeah i want one that produces more power

So what you want is a USA (pre-1981) oval port head.

They come in several styles:
* Early ones have no water passages for the intake manifold
* Later one (1980-1981) have passages for water-heated intake manifold
* A12 GX heads make the most power but need A12 GX manifold as the ports are larger than A14/A15 heads

So it's best to get the head and intake as a matching set

Where do i search for these ? i would prefer the gx but I do not know of anyone who has one?

Go to the local pull-n-pick yards. All the B210s 1975-1978 have the head. Except for 5-speed cars which have the lo-po heads.

Or check eBay twice a week

Or check Craigslist three times a week.

thanks i have a pick and pull about 5 mins away from me. hey i want to do a tranny swap from 4speed to 5 would i get the same tranny from the newer 210? i wouldn't mind a doggy one either

Yes, either transmission will work, the B310 (210) one is lightest, and fits best. Be sure to get the engine plate, throwout bearing and clutch fork that matches the transmission.