will it fit straight in? someone is selling and i really love the look of it

the pb110 hood is a different shape, and also needs the matching guards,front panels, and the panel between the bonnet and windscreen is also different.
might look a bit odd with just the bonnet.\

you can see the obvious difference here with the pb110 bonnet
pb110

No one has tried this.

I think it will bolt right on. But being about 1.5" longer will look funny.

from the photo, i think it is more than 1.5inch longer and it should be wider.
if it is never been tried before, than i'm gonna be the first i guess

It is not wider. Take photos, we want to see it. Thanks.

the hood will arrive today. i'll take some photos and we'll see how it goes

The PB110 is 40mm longer in the wheelbase than the B110 & it is all in front of the firewall. Additionally, the front sheet metal is longer in front of the RSP [Radiator support pannel] so I think that it will fit your hinges, & it will fit between the front mudguards/fenders, it will also sit forward of your existing sheet metal.
I also suspect that the latch mechanism will not pick up the catch on the RSP as the bonnet/hood parts will be too far forward.

Looking forward to seeing how it turns out.

shark nose it.

yes, as predicted, pb110 hood wont fit b110

there are a lot of differences between these two

i'll list down the differences for future reference

1st the pb110 is wider

b110 hood is exactly 4f wide and pb110 hood is 1 1/2 inch wider

Attach file:

---

  P1010570.JPG (38.78 KB)

even tho it is wider at the back, the front of the hood is almost identical in measurement.

ok lets get back to the list

2nd - as we all know, it is longer. by a mere 4 inches!
the catch mechanism also placed further foward

3rd - pb110 hood wont fit b110 hinges. the mounts are angled differently and they are a few inches apart compared to b110. so there is NO way you can mount it to your b110 without any mods done.

these two hoods at least share a similar curves at the back, even tho pb110 cowl panel is different. but being wider at the back, it requires a narrower front guards.

heres some photos ive taken to show how different these two
(pb110 hood is in white and b110 hood is in flat black)

Attach file:

---

  P1010570.JPG (38.78 KB)


  P1010574.JPG (34.83 KB)


  P1010572.JPG (30.37 KB)


  P1010577.JPG (31.64 KB)


  P1010571.JPG (34.33 KB)


  P1010575.JPG (34.87 KB)


  P1010588.JPG (34.48 KB)


  P1010590.JPG (33.00 KB)


  P1010587.JPG (31.41 KB)