I wonder what they're worth each? (Not that I'd be looking to buy 100 though)

China company may could change the minimum quantity. if you can negotiate to China company.

I bought mine for $135 shipped to my door and i fitted it up last weekend! car needs a tune but all in all a much better improvement over the old one! just had to swap my choke cable round to the other side and done!

the guy i dealt with is happy to send out 'samples' and would be happy if people wanted to do a group buy..
i can pass details on to anyone who's interested.. sure beats buy a 2nd hand one and recoing!

was that each or for a pair of su carbs? or was it for the stock a series carb?

that was for the stock hitachi carb off a 1200

sunny_coupe110: Does the "16010-H1602" fit a stock standard Australian a12?

would i need to change the float level or jets?

Yes, it fits any A12 even antipodal ones. Jetting is fine for any stock type A12.

The choke cable comes from the opposite side.

it's just the one I bought (i posted about it in this post) and fitted is not running right.. mechanic has said it might be the float or jet setup..

Everyone says that. But the jetting for USA vs Japan model is different, it's not enough to make it run poorly. In other words the jetting will run good either way.

Yes, if the float adjustment is not correct it will run badly. But you can check this by the sight glass on the outside of the carburetor. It is visible without removing any parts

Thomen, now that you have one, what do you think about the quality?