After a dual circuit master cylinder to put in my 1200 sedan. Anyone got one lying around after doing a brake upgrade? Preferably in working condition but I may end up getting an old one reconditioned if I have to.

Preferably pickup in South Australia but if I can get a good one posted that's fine too.
Thanks, Tom

Slip down to PowerBrakes and buy a new one to suit

Yeah I phoned them the other day and they don't have new ones anymore. They said they could rebuild an old one and that would be around $250. So I thought I'd see if anyone had a good one cheaper they wernt using after upgrading. I'm after the non booster one that came in the utes that had disc breaks on the front.

Coupes had discs and dual circuit... utes didn't
However... they ran boosters too

Have you upgraded the brakes at all
When I used to do my brake conversions I used a boosted master and made my own rod from a Toyota clutch master rod
Then I had lots of masters available in various sizes

you can get them new for like $120

i brought a new one for my ute at the end of last year from Better Brakes. Was around the $250 mark...

Here you can buy them from $24 to $283 (Nissan price)

The higher price does not necessarily mean higher quality. But the Nissan unit is new casting and very good quality.

You can get them new from datsport or even do a upgrade to a larger one like the mad dat one or a 510 one from datsport