hi guys, just chasing a good condition sr20de so I can do a conversion. I even have a few good condition sr20det bits I can swap as I had one in my 180sx but it did a big end so i cant use that motor. things like low mount gt3071 turbo, sr20det 5 speed box in good condition (im going stumpy 5 speed) and a s15 head with stage 3 cams and valve springs, done 100k's since full reco, only because it did a big end :(

any help would be much appreciated

Woody, I've got such an engine, it only had a supposed 16000 k's on it when I bought it back in 1994 & it's been sitting around ever since, though I got the sunny it was going into 80% done before the money ran out. I've got the standard computer & inlet & exhaust's with a starter motor, but no alternator. It,s still got the standard flywheel & clutch on it.I've also got a 4into 1 set of extractors I got off Ebay & a series 3 B/bird gearbox with an SR20 bellhousing. The sumps been dented up where it was lowered to the floor too quickly when we removed it from the car, so that'd have to be repaired or replaced with an alloy extension. If you're interested give me a PM & we'll see what can be arranged. Would love to see it used in something, rather than sitting in my shed getting in the way.