User Login    
 + Register
  • Main navigation
Main Menu
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search

Advanced Search
Google Ad

Browsing this Thread:   1 Anonymous Users





datsunbeginner
Ute: connecting main harness to rear harness
#1
No life (a.k.a. DattoMaster)
Joined:
2010/6/2 13:35
From Toowoomba & New Jersey USA
Group:
Registered Users
Posts: 2341
Offline
Can anyone show me how to connect the main harness on the dash to the rear harness for the rear lights, license plate lights, etc... on a 1200 ute?

I know there is a flat looking section of wiring that is hidden under the carpet but where does it connect to? I assume it is concealed in the body behind the cabin?

Thanks.

Posted on: 2016/4/4 18:32
_________________
---1976 B120 "THE GENERAL REE"--- Former build
---1980 B120 Vanilla Ice --- current build
Transfer the post to other applications Transfer


ddgonzal
Re: Ute: connecting main harness to rear harness
#2
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
The flat wire is part of the Body Harness

Open in new window


* 24012 Engine Room Harness (includes front light wires)
* 24013 Instrument Harness (dashboard)
* 24014 Body Harness: goes from firewall to rear of car, under floor mat
* 24015 Tail Harness (rear lights)

Posted on: 2016/4/5 0:25
Transfer the post to other applications Transfer


cadet1200
Re: Ute: connecting main harness to rear harness
#3
Home away from home
Joined:
2003/11/27 13:29
From Melbourne
Group:
Registered Users
Posts: 898
Offline
The rear harness comes in near the bottom seat belt mount on the Drivers side (RH Drive). There should be a rubber grommet with a connector coming through it. This should plug into the flat multi-cable you mentioned, which is normally stuck down to the floor and heads to the main harness.

Posted on: 2016/4/5 1:57
Transfer the post to other applications Transfer


ddgonzal
Re: Ute: connecting main harness to rear harness
#4
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Yes, the flat wire (Body Harness) has only three connections:
* To Instrument Harness
* To Rear Harness
* To Room Lamp harness

The front corner is where Body and Engine harnesses plug into the Instrument (not shown in photo) harness. LHD photo (reverse for RHD)
Open in new window

Posted on: 2016/4/5 2:03
Transfer the post to other applications Transfer


ddgonzal
Re: Ute: connecting main harness to rear harness
#5
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
The main harness is the Instrument harness, no? Rear harness is called by Datsun "Tail Harness"

Quote:
how to connect the main harness on the dash to the rear harness for the rear lights, license plate lights, etc
What connects the two is the flat-wire Body Harness


This photo shows where the Instrument Harness connects to the Body Harness (yellow arrow goes to Body Harness I believe for the mid-model ute)

Attach file:


jpg  Instrument Harness.jpg (120.75 KB)
174_57031a58a8aa3.jpg 1024X768 px

Posted on: 2016/4/5 2:49
Transfer the post to other applications Transfer


datsunbeginner
Re: Ute: connecting main harness to rear harness
#6
No life (a.k.a. DattoMaster)
Joined:
2010/6/2 13:35
From Toowoomba & New Jersey USA
Group:
Registered Users
Posts: 2341
Offline
Ok awesome, thanks for the info guys. I'm putting the rest of the wiring in this week.


Posted on: 2016/4/5 4:28
_________________
---1976 B120 "THE GENERAL REE"--- Former build
---1980 B120 Vanilla Ice --- current build
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]