User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users





Strange Stud Pattern spacing on mags.
No life (a.k.a. DattoMaster)
Joined:
2002/7/19 12:41
From sydney australia
Group:
Registered Users
Posts: 1858
Offline
Last weekend I tried to fit some 13 inch Momo mags on the back of a car, & they didn't fit over the wheel studs, though not by very much. The wheels are suppose to fit a Datsun, are very light even with the 205/60 tyre on it, but I think the stud spacing is wrong. I know the Datsun is 4x114.3 (4 1/2 inches), & that other cars use 4x100 (4 inches) but I was wondering if any cars used 4x108 (4 1/4 )? I seem to recall something about European Fords using this size. Can anyone confirm if this is true. I can't use these rims now, but need to know what they're for before I can sell them.

Posted on: 2016/11/22 9:50
_________________
Would it be possible to get a late model Nissan Micra, fit the 1.8 litre motor from a Tiida & then turbocharged it? Your answer must include parts numbers for the conversion. You have 12 months. Commence.
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
Just can't stay away
Joined:
2003/4/17 8:05
From BRISBANE NORTHSIDE
Group:
Registered Users
Posts: 104
Offline
Mk 1 and Mk 2 Cortina are 4 1/4".

Posted on: 2016/11/22 9:52
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
No life (a.k.a. DattoMaster)
Joined:
2008/6/10 15:46
From Armidale N.S.W
Group:
Registered Users
Posts: 5652
Offline
Yeah a lot of early 4 stud fords (and pretty sure mazdas) were 4 1/4"

Posted on: 2016/11/22 9:54
_________________
71 1200 Sedan A12 cruiser build
73 1200 wagon SOLD
76 1200 Ute CA18DE And Stumpy box SOLD.
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Ford Mustang/Pinto/Escort/Focus/Fiesta is 4 on 4.25" PCD (except 1st-gen Mustang which is 4 on 4.5"). See http://wheel-size.com/pcd/4x108

I think only the Mazda which used 4 on 4.25" is Mazda 2. Many Mazdas used 4 on 4.5" while early RX7 used 4 x 110mm

Posted on: 2016/11/22 10:51
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
No life (a.k.a. DattoMaster)
Joined:
2002/7/19 12:41
From sydney australia
Group:
Registered Users
Posts: 1858
Offline
So it seems they came off an English ford, or something with this PCD. So now I can sell them on to a ford owner & they'll likely fit. Thanks to Dave, Andy & Sticks for their replies. Pity as the wheels are very light & very nice looking. Oh well, off to Gumtree. Bye the bye, was looking at the small fords in Gumtree & somebody wants $50K for a TC Cortina with a 302 V8 & such like, reminiscent of the Bob Pinnell converted cars from when I was a young'un in the early 80's at the Street Drags at Oran Park.

Posted on: 2016/11/24 7:55
_________________
Would it be possible to get a late model Nissan Micra, fit the 1.8 litre motor from a Tiida & then turbocharged it? Your answer must include parts numbers for the conversion. You have 12 months. Commence.
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
No life (a.k.a. DattoMaster)
Joined:
2002/7/19 12:41
From sydney australia
Group:
Registered Users
Posts: 1858
Offline
A friend at work who has early Fords was very interested in these wheels, so I threw one in the boot(trunk) of the car & took it to work. Bad news, everybody, they're not 4x108. The PCD was measured at 4x110. So, any Mazda 626, RX7 or Daihatsu owners need a set of 13 inch mags? Depending on the price, I might get them redrilled to 4x114.3 if it isn't too expensive.
I have a place near work that will do this, as I say, depends on the price.

Posted on: 2016/11/29 7:17
_________________
Would it be possible to get a late model Nissan Micra, fit the 1.8 litre motor from a Tiida & then turbocharged it? Your answer must include parts numbers for the conversion. You have 12 months. Commence.
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
What do they look like?

Posted on: 2016/11/29 8:04
Transfer the post to other applications Transfer


Re: Strange Stud Pattern spacing on mags.
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31575
Offline
Got any photos?


4 x 110mm PCD

* 1979-1982 Mazda Capella/626/Montrose
* 1979-1985 Mazda SA Savanna/RX-7
* Daihatsu Mira 1980-1997
* Daihatsu Charade 1977-2000 (including G100/G200)
* Daihatsu Hijet 1987-1998

Posted on: 2016/12/1 1:01
Transfer the post to other applications Transfer






You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]