A good thread to work out some efi boost choices pre after after
http://www.sxoc.com/vbb/showthread.ph ... cooled-supercharger-setup

Ive sent a H190 LSD clutch pack centre to Finland and Holland recently
for 2 different cars a sunny and a cedric etc. The H190 can be found in
720 and navara & vans but not sure how popular they were in Denmark.

Great thread!
I can get the Rotrex with an experimental housing that has internal recirculation/bov ;)
And the TB's I designed won't be able to be forced open by pressure... I think *_*

H190 complete centers? How much did that cost them ?
Then I just have to build my axles etc. onto those?

There aren't that many old nissans up here, unfortunetly...

To use an H190 complete center ...




... requires an axle housing



H190 Axle Housing came in many, many Datsun/Nissans:

* 1985- Nissan Vanette C120.A12 truck
* 1979- Nissan Vanette C120.A14,A15 except coach
* 1979- Nissan Vanette C120.LD20,LD20T,Z20
* 1966-1967 411 Bluebird
* 1968-1970 S311 Fairlady/Sports Roadster
* 1968-1972 510 Bluebird wagon
* 1973-1977 610 Bluebird/160U wagon
* 1982-1983 late S110 Silvia/Gazelle/200SX
* 1977-1980 810 Bluebird/Maxima wagon
* 1981-1984 910 Bluebird/Maxima wagon
* 1963-1965 320 Truck
* 1967-1972 520/521 Truck
* 1973-1979 620 Truck
* 1980-1986 720 Truck
* 1986-1997 Nissan D21/Navara (gasoline 4-cyl)
* 1997- Nissan D22/Navara (2WD 4cyl except King Cab)

DD thanks for the masterful info even more models than I imagined!

I can get the a complete housing but shipping from here is
prob more expensive than from the US which also has them.
The centre themselves are 750usd plus 110-120usd postage
I put lower costs for each unit to help with their takks ;)

My units are behind many different cars atm and one in
particular is a daily, track, drag abused bluebird with
turbo sr20det that paints 11 on a regular basis so they
are strong! the other I remember is a track 280c with
178rwkw L28 which is a showcar but also historic racer

Great info! Cleared up a lot of questions of where and how

When the time comes, I'll see what possibilities I have :)

Most economical option for me is probably the axel from a Suzuki Vitara, a Pajero, Patrol or something alike.
That I can get pretty cheap and they will be plenty strong.