User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad



Browsing this Thread:   1 Anonymous Users



(1) 2 »


Chinese knock off distributor for A series
Home away from home
Joined:
2004/6/19 15:16
From Wallan, Vic, Aus
Group:
Registered Users
Posts: 312
Offline
Gday. A few years ago I bit the bullet and bought a Chinese 22100-G5110 electronic distributor in my daily drive 120y with an A12. I have done over 100000km with it and its been no problem. Not bad for a $90 distributor. However the distributor cap is starting to wear out.

Can anyone tell me where to get a new cap? I can't find one anywhere. I've tried emailing the people who sell the distributors to no avail. I have checked ebay and done google searches. I don't want to buy a whole distributor just for a cap. Apparently its a clone of the Mitsubishi 22100-G5110 distributor but I can't figure out the part number for the cap. Any help would be appreciated!

Posted on: 2023/4/13 7:52
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
No life (a.k.a. DattoMaster)
Joined:
2002/8/11 8:22
From Perth
Group:
Registered Users
Posts: 2691
Offline
Try a JP594 Fuelmiser cap
Suits an N12 Pulsar with Mitsubishi dizzy
https://www.repco.com.au/parts-service ... utor-cap-jp594/p/A7503067

Posted on: 2023/4/13 12:52
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Home away from home
Joined:
2004/6/19 15:16
From Wallan, Vic, Aus
Group:
Registered Users
Posts: 312
Offline
Ah thankyou for that. I will get one and try it. I'll post back here the results. Its pretty cheap as well which is a bonus.

Posted on: 2023/4/13 20:30
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
22100-G5110

This is from 1986-1991 C22 Nissan Vanette A15 engine

With a screw-down cap
Open in new window

Posted on: 2023/4/14 23:10
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Home away from home
Joined:
2004/6/19 15:16
From Wallan, Vic, Aus
Group:
Registered Users
Posts: 312
Offline
Thanks for that. Yeah the china one has the screw down cap.

Posted on: 2023/4/18 0:49
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Home away from home
Joined:
2004/6/19 15:16
From Wallan, Vic, Aus
Group:
Registered Users
Posts: 312
Offline
So an update on this saga. I purchased a GH 617 distributor cap with is also a JP594. It has both numbers on its packet. It doesn't fit. I have contacted a few sellers on ebay who are selling these distributors. No luck yet.

Posted on: 2023/4/26 8:27
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
No life (a.k.a. DattoMaster)
Joined:
2002/8/11 8:22
From Perth
Group:
Registered Users
Posts: 2691
Offline
hmmm
A JP594 is a Bosch GH633
May be the same... but may pay to double check
Try also JP666

Posted on: 2023/4/26 11:16
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
Can you post a photo of your cap?


Nissan 22100-G5110 distributor takes cap:
* 22162-78A10
Can buy from forklift suppliers, eBay, Amazon.com

But the knockoff distributor might not use the same cap

Attach file:



jpg  Fuelmiser JP594.jpg (35.56 KB)
174_6449a14809197.jpg 515X515 px

jpg  22162-78A10.jpg (91.09 KB)
174_6449a1bedfc46.jpg 800X1200 px

jpg  22162-78A10_b 76mm I.D..jpg (153.95 KB)
174_6449a1d975325.jpg 1024X800 px

jpg  22162-78A10 94mm cap bolt pattern.jpg (122.90 KB)
174_6449a216d15eb.jpg 1200X864 px

Posted on: 2023/4/26 23:13
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Home away from home
Joined:
2004/6/19 15:16
From Wallan, Vic, Aus
Group:
Registered Users
Posts: 312
Offline
Okay good news. I took a gamble and purchased a YD141 distributor cap. Its a perfect fit. The downside is it was expensive because the closest one on ebay came from Germany. But still cheaper than buying a whole Chinese dizzy.

So thats it, a YD141 is the cap. Its exactly the same.

Also postage took a while and I was impatient. I got a Accuspark electronic ignition kit off ebay and put it in the original Hitachi dizzy. Its works well.

Thanks for the help chaps.

Posted on: 2023/5/11 7:10
Transfer the post to other applications Transfer


Re: Chinese knock off distributor for A series
Moderator
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
Posts: 31599
Offline
Good work. How did you come up with the number YD-141? That is for a 1989-1992 Daihatsu Charade 1.3. The cap we have locally here is a JD916

Posted on: 2023/5/11 10:54
Transfer the post to other applications Transfer



(1) 2 »



You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.

[Advanced Search]