Browsing this Thread:
1 Anonymous Users
|
|
custom intake |
|
Home away from home  
Joined:
2007/1/1 21:50
From Toowoomba, Australia
Group:
Registered Users
|
Im lookin at building my own custom carby intake manifold to take a 350 holley for my new turbo setup with out all those adapter plate that will also have good flow and im after some pics and advice on building one
cheers
Harley
Posted on: 2008/8/10 11:17
|
_________________
The substitute for cubic inches is forced induction.... wanted fender mounted mirrors 4 120y & 120y hubcaps 120y 2dr every day driver 120y 2dr project 
|
|
|
Re: custom intake |
|
Home away from home 
Joined:
2006/11/27 2:42
From NSW, Australia
Group:
Registered Users
|
Yea i'll be building one at the end of the year when my new bottom end will be ready. at the moment i have the Oval port inlet with the adapter plate welded straight to the manifold and ported right out inside.
It seems to work very well but limits the size of the porting you can do to the head.
I will be using something like twin webber mainfold or sidedraft that will allow for serious porting to the head and keep the overall height of the 350 holley under the bonnet.
At the moment my hat on the holley just pokes out of my bonnet, so im using a scoop.
The other person that can give you some pointers is Steveo send him a PM or he might see this thread if your lucky.
Lets us know what you end up doing.
Posted on: 2008/8/12 11:49
|
_________________
Cheers, Big D Quadruple Crown in 1980, the year my 1200 was Built. 
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
