Browsing this Thread:
1 Anonymous Users
|
|
ca18 idle question |
|
Home away from home  
Joined:
2012/11/16 10:46
From Port Douglas. QLD
Group:
Registered Users
|
Hi,
I've got my ca to idle nicely at 900rpm.
However while driving and pulling up to a stop or slowing down (depressing the clutch) the idle sits at 1100 or 1200rpm.
It then settles back down to 900rpm after a short while.
Is this normal? Timing good, tps good. idle screw fine and no vac leaks.
Can live with it but just annoying
Posted on: 2014/10/5 1:21
|
|
_________________
1200 ute
ca18det
|
|
|
Re: ca18 idle question |
|
Home away from home Joined:
2005/3/2 7:09
From Canberra
Group:
Registered Users
|
You will have to provide more info.
Is the idle speed control valve connected? What ECU (standard or aftermarket)? Is the car up to temperature when it happens? Any other engine mods that might stuff with the ECU. Injectors. AFM. Etc. all these things can play a roll in how the car settles at idle.
Posted on: 2014/10/5 3:26
|
|
|
|
|
Re: ca18 idle question |
|
Home away from home Joined:
2012/11/16 10:46
From Port Douglas. QLD
Group:
Registered Users
|
Thanks McGee
iacv valve connected. AAC valve is not...I have no connection for that on my loom.Pulled apart and cleaned and also tried another spare one I had.
Standard ecu, car is warm .
Pod filter, ss manifold, intercooler the usual stuff. stock injectors and afm..
Tried 3 diff tps too.
Posted on: 2014/10/5 3:56
|
|
_________________
1200 ute
ca18det
|
|
|
Re: ca18 idle question |
|
Home away from home Joined:
2012/11/16 10:46
From Port Douglas. QLD
Group:
Registered Users
|
tested bov and found no air leaks anywhere else.
Posted on: 2014/10/5 3:57
|
|
_________________
1200 ute
ca18det
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
