Body

Revision as of 06:09, 23 June 2007; view current revision
<-Older revision | Newer revision->

The Datsun 1200 had a wikipedia:Unibody design made out of high-strength steel.

Also See

Also See:

• Badges emblems, marks, IDs
• Colors
• Radiator Grille

and

• Category:Body

Bonnet (Hood)

The bonnet (hood) of the Datsun 1200 is a classic design: an elegant flat sheet with a strengthening ridge down the middle. You can use the ridge to aim it down the autobahn.

Early Bonnet

The type of hood used by all export 1200s (1971-2007), and for all Sunny Trucks.

It was used in Japan as the 1971-1972 bonnet for Japan Domestic Market cars (sedans and coupe). This means B110s produced starting in 1970 calendar year. The Model year starts during the previous calendar year.

Late Bonnet

1972 & 1973 JDM 1200s used a hood with a distinctive chevron-shaped "power boss":

This is sometimes called the "GX Bonnet", but as can be seen in this factory brochure was fitted to non-GX 1200s like this GL.

It apparently was Japan-only so seems unlikely the Nissan local subsidiaries would carry them. In any case it is part number:

• 65100-H3100 PANEL ASS'Y-hood

If there are any actually available, you'll want to verify it has that specific design, as Nisan may consider the original style a valid replacement part. Let us know what Nissan tells you.

Guards (Fenders)

Doors