Sedan Grille

Revision as of 08:32, 10 May 2009; view current revision
<-Older revision | Newer revision->

Datsun 1200 Sedans were fitted with a stainless metal grille. 1200 Pickups from 1971-1977 use this too. The 1972 JDM facelift introduced a new grille, but it too was different from the plastic Coupe grille.

Also see: Grille Overview, Badges

Original Grille

Emblems

For grille trim badges and part numbers, see Badges

Sedan grille "D" and "S" emblems (marks, badges):

• Japan market 1200s used "S" mark
• Export market 1200s used "D" mark

Fitting

Click for full size pictures of the grille mount points:

And the eyebrow trim mount points:

Fitting to Others

Fitting Sedan grille is done in Japan to nearly all Datsun 1200 trucks (change from Coupe-type grille to Sedan grille). Also you can fit it to a Coupe.

1. Fit one L-shaped bracket to center top of front body

   

2. Drill four holes in radiator support
3. Fit two thin brackets to back of sedan grille

   

4. Screw grille with sheet loops to front of car
5. Fit the headlight surrounds

   coupe and late ute are missing the outer bracket:

   

   I believe all core supports have the inner two eyebrow mount holes, though you may need to add the little square screw hole wedgies:

   

   96706-B0700 GROMMET for screw

Part Numbers

• Grille (1-3)

  62302-H1003 ASS'Y-grille, radiator Sedan (exc. GX), Van, Truck -7803 $169.65 USD

  62302-H2300 ASS'Y-grille, radiator Sedan GX

• 96706-B0700 SCREW-grommet (4 total) $1.00 USD

  85-10410-4 SCREW (4 total)

• Center Badge (4-7)

  62312-H1026 SET-ORNAMENT, radiator grille ['S']

  62312-H1626 SET-ORNAMENT, radiator grille ['D'] $16.80 USD

  • 89-15434-1 WASHER-plain (2)
  • 89-15134-1 WASHER-lock (2)
  • 89-11104-1 NUT (2)

• Grille side emblem (8-13)

• Eyebrow Trim (head lamp Rim) (14-19)

  62320-H1002 ASS'Y-RIM, head lamp (R.H) $39.17 USD

  62321-H1002 ASS'Y-RIM, head lamp (L.H) $39.17 USD

  • 85-30412-9 Screw: Stainless outside (1 per side)

    96706-B0700 SCREW-grommet [square-hole wedgie](2 per side)

  • 85-30412-9 SCREW (1 per side)

    89-64104-4 NUT-spring (1 per side)

• Surround Trim (20-25)

  62322-H1001 SURROUND-radiator grille, upper $40.27 USD

  • 85-40410-12 SCREW (6 needed)

  62323-H1001 SURROUND-radiator grille, lower $27.13 USD

  • 85-40410-9 SCREW (10 needed)

  62324-H1051 SURROUND-radiator grille, side with rubber (R.H) $29.50 USD

  • 4 screws, unlisted in catalog

  62326-H1001 RUBBER-SURROUND,RADIATOR GRILLE (1 per side)

  62325-H1051 SURROUND-radiator grille, side with rubber (L.H) $29.50 USD

Radiator Core Panel (Applies to Sedan including 1972 facelift, Van, and Truck -7803)

• 62500-H1000 ASS'Y-SUPPORT, radiator core
  • Coupe differs (H18)
• 62512-H1000 RAIL-support, radiator core, upper
  • Coupe differs (H18)
• 62524-H1000 PLATE-closing rod (optional)

  Also listed as COVER ASSY-COOLING HOLE Truck -7803

  • 62524-51012 SCREW (4)

• 62522-H1001 STAY-hood catch
• 62612-H1000 PLATE-apron front
  • Coupe differs (H18)
• 77720-89908 SCREW (4)
• 63140-78500 NUT(4)

1972 Minor Facelift

The 1972 JDM facelift introduced a new grille for sedans.

Retro-fitted to newer Sunny Truck:

Emblems

Late JDM intricate "S" grille emblem