User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

620 Headlight Wiring

(Difference between revisions)

Datsun 1200 encyclopedia | Recent changes | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy | Current revision
Category: Body Electrical System

Revision as of 00:21, 18 April 2014
ddgonzal (Talk | contribs)
(->Non-relay Type)
<- Previous diff
Revision as of 00:22, 18 April 2014
ddgonzal (Talk | contribs)
(->Relay)
Next diff ->
Line 67: Line 67:
1978-1979 model year did not use a relay. 1978-1979 model year did not use a relay.
-1972-1977 used a relay.+1972-1977 used a relay on for North America models.
25230-28000 ASSY RELAY,LIGHT -0874 25230-28000 ASSY RELAY,LIGHT -0874
25230-B8000 ASSY RELAY,LIGHT 0974-0776 25230-B8000 ASSY RELAY,LIGHT 0974-0776

Revision as of 00:22, 18 April 2014

Early Datsun 620 for North America used used a relay. Later 620 was made more reliable to discarding the relay. 620 does not use switched-earth headlight wiring like the Datsun 510.

Contents

4-headlight system

High - 4 lamps light up (high filaments)
Low - 2 lamps light up (low filaments)

So the low beams go OFF when the high beams come on. All four headlamps with light, but only on the high circuits.

Non-relay Type

Power for the headlamps comes via the Fuse Box, specifically the 'L' (lamp) fuse. The headlight switch provides power OUT when pulled to the 3rd position. From there power goes to the Dimmer Switch on the steering column. Depending on the lever position power is switched to the High Beams or the Low Beams.

1974 620 lighting diagram

LOW  - RB wire (Red wire with Black stripe)
HIGH - RW wire (Red wire with White stripe)
GROUND - headlight sockets are grounded at earth point
         in engine room via engine room wiring harness

Relay Type

Used in North America 1972-1977. 1978-1979 did not use a relay.

The same Lighting Switch is used. Power OUT is sent to the relay instead of the Dimmer Switch.

The Dimmer Switch differs - it is much simpler. Power is not routed through the Dimmer Switch. When in High Beam position, it grounds the Relay coil to switch the beams. The Relay is located in the engine compartment.

1974 620 lighting diagram

Fuses

Power for the headlamps comes via the Fuse Box, specifically the 'L' (lamp) fuse in the Fuse Box.

'L' 15A head Lamp fuse
* High beams
* Low beams
* high beam pilot lamp in dash cluster

The Parking lights are on their own fuse. But still goes through the Lighting Switch. Headlight fuse can be burned out and P light work fine.

'PT' 10 AMP Park lights, Tail lights
* Meter illumination lamps in dash (except T/S and high beam lamps)
* Parking lamps
* Taillights
* License plate lamp
* Engine room lamp (only works with light switch pulled out)
* For North America
  Wiper knob illumination
  Heater control illumination

Stop lights and Hazards on yet another fuse.

'H' 15 AMP Horn, Stop lights, Hazard lights 
* Hazard lamps (North America)
* Stop lamps

Reverse lamps on a different fuse.

'M' 10 AMP Meter, Reverse Lights, Alternator Regulator 
* Reverse light
* Turn Signal lights

The Room Lamp is independent of headlight circuit. It doesnt go through the Lighting Switch. It has its own fuse.

'C' 15 AMP Radio, Clock, Cigarette lighter, Room lamp

Relay

1978-1979 model year did not use a relay.

1972-1977 used a relay on for North America models.

25230-28000 ASSY RELAY,LIGHT -0874
25230-B8000 ASSY RELAY,LIGHT 0974-0776
25230-89965 ASSY RELAY,LIGHT 0876-0777