User Login    
 + Register
  • Main navigation
Login
Username:

Password:


Lost Password?

Register now!
Fast Search
Slow Search
Google Ad


[Datsun 1200 encyclopedia]

Automatic removal and installation

From Datsun 1200 Club

Datsun 1200 encyclopedia | Recent changes | Edit this page | Page history | Switch to MediaWiki mode

Printable version | Disclaimers | Privacy policy
Category: Transmission

Removal

  1. Raise car on jackstands
  2. Drain and remove radiator (to prevent damage)
  3. Drain automatic transmission fluid
  4. Remove driveshaft
  5. Support rear of engine with jack
  6. loosen engine mounts
  7. Unplug wires on automatic gearbox
  8. Unplug vacuum hose on gearbox
  9. Unbolt shifter linkage
  10. place jack under gearbox
  11. Remove engine/gearbox dust cover
  12. Unbolt flex plate bolts, rotate engine to reach each bolt
  13. Unbolt transmission from engine
  14. lower rear of engine AND gearbox slightly
  15. Slide transmission back about 2 inches
  16. Lower gearbox jack

Retrieved from "http://datsun1200.com/modules/mediawiki/index.php?title=Automatic_removal_and_installation"

This page has been accessed 2,391 times. This page was last modified 07:38, 28 August 2016. Content is available under Datsun 1200 Club.