Used Cosworth A14 +0.040" race pistons complete, $200. New Arias A14 +0.040" race pistons, no pins, $25 each. Jeff Werth "torque" cams, from $50-75. Used race cams from $25. B210 race headers, $125 and $100. Very RADICAL A12 lightweight race crankshaft. Almost all of the weight gone. Knife edged. $200 obo. MSD Ignition pieces. Peter 314 291-8441 or cell 314 724-7098

If anyone wants to watch the Gt4 & 5 race at the Mid-Ohio sports Car course, I can either get you in free or for $10. It's a GREAT place to bring family and the inside hillsides are supposed to be open. Peter 314 291-8441 home or 314 724-7098 cell. If you want to become involed as a crew for a 1200, I can either use you on my crew or set you up with a car from your local area (ANYWHERE in the USA or Canada). PeterZekert@Juno.Com

New in the box 4.11 ring and pinion for the H145 (38100-H1100) for $150 US.

Used dry sump oiling system with tank; lines; pump and bracket; crank pulley with drive mandrel; drive belt. Everything (bolts; brackets, etc.) except the pan (which was lost in a prior move but was simply a stock pan with 2 pickups.) $250 US.

New TDC Aluminum dry sump oil pan (use with above to complete the system??) $250 US.

Peter (please e-mail or call because I don't check the board too often). 314 291-8441 home or 314 724-7098 cell or PeterZekert@Juno.Com

We had quite a lot of trouble with the NISMO (or Nissan Competition) lifters failing in the 80s and 90s. Now, most A series racers in the US use lifters made from tool steel. Now, no cam failures. Reliability is very good! Many shops sell these for about $250 - $300 USD per set.

I had my fiberglass shop make 2 front bumpers using the top half of my bumper/airdam mold for the race car. Bumper $65 US. Bumper with air dam $150 US. Peter 314 291-8441 or cell 314 724-7098 or PeterZekert@Juno.Com

Thanks, The system is SOLD!!! Peter

New A series dry sump system. New aluminum pan with 2 scavenge outlets $250, pump bracket (which is also the block adapter) $100, 3 stage pump $500 or the entire setup for $750 USD. Peter 314 291-8441 or cell 314 724-7098 or peterzekert@juno.com

(Since I race I have A series parts) Set of A12 +0.040 Cosworth dome pistons (74mm), no rings or pins, $50 USD.

New Werth Torque Camshafts, $150. (Shift at 7800 rom, not 9500 rpm.)

Competition 5-speed parts.

MSD Ignition parts.

Fiberglass body panels.

Peter Zekert 314 291-8441 or 314 724-7098 or e-mail peterzekert@juno.com

Ported A14 race head, dual valve springs, Nismo aluminum spring retainers. $200. Many good used race camshafts from $25 up. Dual valve springs. Single groove crankshaft pulleys. Etc..... Peter 314 291-8441 or cell 314 724-7098.
PeterZekert@Juno.Com

I have a set of 4 used Cosworth A12 or A13 race pistons that measure 2.091 - 2.902 inches in diameter. They are in decent used condition, usable. for $100 USD. (New cosworths are $600 USD a set here.) These have the valve reliefs and are wedge shaped dome pistons. They have the large 19mm piston pin. Peter at PeterZekert@Juno.com in the center of the USA.