Ok
So having some dramas uploading photos.
But i am happy to email anyone interested, most of the stuff I am listing is brand new and never used.

list of parts included with a14 block.
*A14 rebore, 2 sizes over
everything below is new and never used. most stuff still in plastic wrap.
*correct size pistons and rings. high comp 7cc alloy.
*timing chain and tensioner.
*full gasket kit, includes head gasket, manifold gaskets, oil pump gasket. sump gasket, front and rear main seals, rocker cover gasket.
*std size bearings. old ones were perfect when i pulled them out. (main bearings and connecting rod bearings)

everything listed below came off the motor, so it is standard.
*oil pump
*thermostat housing and thermostat.
*connecting rods (old pistons still attached)
*rocker cover
*oil sump
*crank with the bearing caps.
*camshaft
*flywheel

pretty much all other little bits and pieces are included.

PM email address for photos.

EDIT: will include a 120y manual which has just about everything needed to build motor,

I did this conversion on a 120y
only i used a 60 series 5 speed, I cant remember exactly. I did use an auto cross member. but i pulled the top half (part that mounts to gearbox) off of the bottom half (part that mounts to car,, seperated by rubber bushes and a bolt each side) and spun the top half around. this worked pretty good with the 60 box but im not sure how it would go with a 56 4 speed. also had to grind a notch out in order to get speedo cable to go into the box.
I had to do this because the auto tunnels dont have provisions for the regular manual cross member.
but in my opinion. if your going to keep the car, its well worth it and improves the car soo much.

J

Should also mention I have std crank, connecting rods, camshaft, flywheel

Hi all. First post in a while but have some bits for sale
All located in warilla, NSW. But will put on a truck at buyers cost. Will have some general freight quotes tomorrow

Sad to see it all go but just not in the datsun game anymore.
Have an a14 block rebore, 2 sizes over. New high comp pistons to suit plus rings
New bearing kit. standard size bearings. Gasket kit. no head unfortunately for motor.. have other bits must check tomorrow. All in pieces
Good start for a hot motor build.

Also have 32/36 Webber with oval port manifold in great condition

Have other bits.. collected all this stuff for a build but things changed, all in good nick never been used.

Also have a straight 120y front bumper chrome pealing a little bit.

Motor and all bits $450
Carbi $150
Both for $550
Bumper $make an offer

Pics up asap
Pm or ph: 0421834559, will return missed calls
Thanks j.

Hi folks

Does anyone know the distance between the 2 wheel archs in the tub of an xf flacon ute?
Need something to float my mower which is about 1200mm wide

Much appreciated
Jay.

Hi everyone

Pretty #OOPS# but i have to sell up all my good stuff that i have only recently collected
From the top

A14 block only just rebored, have oversized pistons. Came apart had std bearings
All a14 bits, hi comp pistons and rings. New bearings full gasket set
Timing chain and tensioner new, std cam suit regrind
Oval port head with double valve springs, needs freshening has had port job

Webber 32/36 with manifold to match, looks brand new, manual choke

A 120y coupe diff, and a sunny diff, have a good tailshaft.
Late ute crossmember

Text 0421834559
Or pm for prices,
Located in wollongong nsw. This is about 1.5 hour south of the syd

Cheers
Jay

Edit : bad spelling

Ok price drop $1200 for the 1200

For $2000 take the car and all my a14 stuff
Block, oversized pistons hi comp, new bearings, timing chain, tensioner
Oval port head with double valve springs needs freshen up. Block only just rebored not sure what size over. Std cam to suite regrind. Late ute crossmember. Nearly ready for assembly!

Hi Ed good to hear about the ute mate, congratulations.. you will feel the diference when you get the stanza struts in

Zigzag, how long is a bit? For a definate sale i could hang onto it

Gday for anyone into bikes here is a link to my bike for sale
Same as my car add. Will swap for work ute with tray, cash adjustments must be auto with a tray

http://m.gumtree.com.au/honda-cbr250r ... age-only/v?adId=314959202

Cheers folks

To the top and price drop. 1500
Would consider swaps for an auto work ute, preferably something with a tray for floating a ride on mower, going to employ my sister... Desperate times people, cash adjustments for the right vehicle