Wanted 3.7 gears for H165 diff.

I had my mate set up a business meeting, and knowing that I can be drawn into a technical discussion which may reveal the methods, therefore giving away the trade secrets - I asked my mate to throw Fanta Injection into the mix when-ever he thought it was needed and the bastard kept it up all the way to the door, I've never had to fight so hard to keep a straight face in all my life.

example "we'll do this by using fanta injection to purify the water as it exits the mill." and yes he said this with a straight face. . . . .

I'll get my mate to pm you, he's got a couple utes, the wagon he'll probably keep

this from the dylectric forums, the guy wants to make a white zombie - here's one of the responses may help you lamb

I eventually plan to use a 7inch 7800 rpm 80 hp electric using a lithium battery pack mated up to my L series dogleg 5 speed, the reason only a small electric and not a quarter mile eating electric missile is because I plan for to be functional, slightly more powerful than the existing, and with a fair amount of range,

But for the time being I'ld be happy running an a12, modded internally to race spec \with quad bike carbs, hopefully a SPRINTEX S5-150 supercharger and a solenoid controlled exhaust system but still looking granny spec (ish) with an orig interior and outside, although the simmons may give it away a bit.

my reasons for buying these are the same, guards not straight, minor denting etc, will post up on Thurs how they fit etc (day off), the finish on them is good.

They have arrived, look okay, will know if they fit later, lots and I do mean lots of packing.

awesome thnx

Vehicle: 1200 deluxe sedan

Front end:standard

Wheel Make/Model: Simmons B-45's

Wheel Size: 8x15

Offset: took them off my mitsubishi

Tyre size: front 15(195x45) Rear 15(205x55)

Spacers Y/N? n

Comments: looks like it's been mini-tubbed at rear, needs guards flared slightly, no internal rub.

currently located in Ferntree Gully, Vic.