hey guys.

iv'e been searching the net for wheels (and tyre combo's) and found it difficult to find details on the fitment of rims on 1200's so i thought it might be a good idea to start a tread based on this one from ozdat (http://www.ozdat.com/forum/viewtopic.php?f=51&t=16561)

please include offset and what front end gear you are running (including added track if know and brakes)


Vehicle:

Front end:

Wheel Make/Model:

Wheel Size:

Offset:

Tyre size:

Spacers Y/N?

Comments:

hope this becomes a "thing"

thanks
J

ps, as soon as i get some decent wheels i'll put one up ;)

Vehicle: 1200 ute with modified fenders

Front end:
* stock, but with small-diameter coils

Wheel Make/Model:
* SSR Mark II

Wheel Size:
* Front: 14x7 +0 offset.
* Rear: 14x8 +0 offset


Offset:
* +0

Tyre size:
* Front: Advan 175/60R14
* Rear: Advan 195/60R14


Spacers Y/N?
* No spacers


Comments:
* Front fenders are slightly flared
* Rear fenders are flared about 1"
* Flush look, so tires rub occasionally
* have about 1" clearance to spring front & rear
* Stretched tires (spec is max wheel width 6" & 7", but I'm using 7" & 8")

Vehicle: 77 1200 Ute

Front end: 120y

Wheel Make/Model: minilights

Wheel Size: 14x6

Offset: +25

Tyre size: front: 14x60x185 rear:14x60x195

Spacers Y/N? No.

Comments: guards are stock totally stock and wheels sit flush. Could probably do with having the front guards rolled. Also the rim clears the strut by about 8mm but this will be increased with a soon to some brake conversion. Rears are a non issue.

Vehicle: 120Y -Rolled Gaurd Lips

Front end: Shortened 120y struts with VW Mk1 Golf inserts. S13 Camber tops (8kg spring)

Wheel Make/Model: SSR Reverse Mesh

Wheel Size: 14x9

Offset: -0

Tyre size:155/55R14 Federal FD1

Spacers Y/N?: N

Comments:
*1.5mm clearance from strut to lip
*lip just outside gaurds
*Stretched tyres
*-5 Degrees Camber

here's mine from over the years:
------------------------------------------
Vehicle: 120Y Wagon & 120Y coupe





Front end: only posting this for rear offsets...
Rear end: ADM 120Y BW68 in both the Wagon & coupe.

Wheel Make/Model: Volk Racing

Wheel Size & offset: 14 x 7.5 +2

Tyre size: 195/60

Spacers Y/N? N

Comments: needs lipped gaurds for lowering like the coupe. Wagon was OK with standard gaurds.

------------------------------------------
Vehicle: 1200 coupe



Front end: Stanza struts, LCA and brakes, lipped gaurds
Rear end: 120Y BW68, lipped gaurds

Wheel Make/Model: R31 steelies

Wheel Size & Offset:
14 x 5.5 +30 front
14 x 5.5 +10 rear

Tyre size:
F 185/60
R 195/60

Spacers Y/N? N

Comments: lipped gaurds, and front gaurd cut

------------------------------------------
Vehicle: 1200 coupe



Front end: Stanza struts, LCA and brakes
Rear end: KE55 BW68 (wider than 120Y BW68)

Wheel Make/Model: Performance Superlite

Wheel Size & Offset: 13 x 7 -7

Tyre size: 205/60

Spacers Y/N? N

Comments: 50mm IPRA legal flares

------------------------------------------
Vehicle: 120Y coupe



Front end: standard 120Y discs, Kings lowered springs. Lipped gaurds
Rear end: standard H150, flipped leaf lowering

Wheel Make/Model: unknown jellybeans

Wheel Size & offset:
13x6 +14
13x7 +3

Tyre size:
F 175/70
R 205/60

Spacers Y/N? N

Comments: lipped rear gaurds.

Vehicle: 1200 deluxe sedan

Front end:standard

Wheel Make/Model: Simmons B-45's

Wheel Size: 8x15

Offset: took them off my mitsubishi

Tyre size: front 15(195x45) Rear 15(205x55)

Spacers Y/N? n

Comments: looks like it's been mini-tubbed at rear, needs guards flared slightly, no internal rub.

Vehicle: 1974 Datsun 120Y 2dr sedan

Front end: stock, lowered. Stock rear also.

Wheel Make/Model: Enkei Easyrider

Wheel Size and Offset:
14x6 +8 with 15mm spacer = effective offset -7
14x6.5 +0 with 15mm spacer = effective offset -15

Tyre size:
165/65 R14
185/60 R14

Spacers Y/N? yes

Comments: lipped gaurds. slight scrub on the back over BIG bumps at speed.

thread is useless without pics:

car: formula junior
front end: VW type 3
front wheel: 15"x5" vw
front tires: 145R15, 155R15 165R15 ( whatever I can get )
rear wheels: 1966 ford mustang 6 14x5.5(rim reversed on the wheel center so there is some offset)
rear tire: 185 R15 (it was ok but 4th gear became overdrive.)
now trying 175 70 14 on the same wheels
other rear wheels: western wheels (aluminum) 13"x 6"
175R13 but have not tried them

Attach file:

---

  1985+Gwynn.jpg (23.74 KB)

I think the wheels are looking a bit tiny as compare to the car structure.

Vehicle: 1974 Datsun 120Y 2dr sedan

Front end: S13 brakes on 120Y struts
Rear end: Stock 120Y BW68

Wheel Make/Model: Performance Hotwire

Wheel Size and Offset: 13x7 +3

Tyre size: 205/60x13

Spacers Y/N? No

Comments: lipped gaurds. Minor pump for front gaurds. No scrubbing at all.

thread is useless without pics: