Hi guys ive bought some 15" ford chasers as im going for ford stud pattern which is what my diff that ive bought is.Does anyone know how much it will cost me to get the chasers customised to suit the front and back off my ute,which is getting tubbed to the rails?The reason im doing this is because my diff i have is very narrow,it measures only 1080mm and buy doing this i can get everything exact without worrying is it going to be wright.

I've had a couple of sets done for my ute & it was a couple of hundred for a pair, maybe a bit more. I Can't remember the exact price. There are a few other places in Syd that will do it.

Hi Lachie do u have any names?

Neale Wheels did mine, they have a website. Good turnaround time, was under a week.

Retro wheels is another. Pretty sure there is another place in Chipping Norton in Syd but can't remember their name.

morton and may i think

there are other options,i could get u custom three peice alloy wheels in sydney for a bit more than the price of widening them i think its around 180 a wheel to widen,but then u still left with a big heavy steel wheel.

Thanks guys,ive tracked down a couple off places in sydney will give them a call tommorrow.I am just getting prices at the moment as i wont be getting them done for a while,i cant really do anything intil its been tubbed and the diff is in position.Hopefully 8" on the rear with 235/50/15 and i think probably 5 or 6" on the front with a 175 tyre.That should keep the engineer happy.
Hi Greendog ive decided on the steelies for a while as i will probably be going fr17's in the long term .

Hi guys just a quick ? is there any rules or law on the dish off wheels as my rears are going to have mega dish,got a couple off prices they seam to be around the $180 mark.This is how mine will look.

Attach file:

---

  wheel.jpg (64.71 KB)

welded wheels can look awesome even these 14s!!

Attach file:

---

  240z.jpg (179.02 KB)

i thin there is actually a percentage that the front tyre width has to be of the back tyre width

something like 60%... not sure... may want to check that one carefully...engineer should be able to clear it up