Browsing this Thread:
2 Anonymous Users
|
|
CA18DET - PCV, Water and Vacuum hoses |
|
Quite a regular  
Joined:
2008/5/26 6:39
From Melbourne, VIC
Group:
Registered Users
|
Hi guys I have been trawling both the Tech Wiki and good old Google but I am struggling to find any clear information or drawings to show the correct factory layout of all PCV, Water and Vacuum hoses on my CA18DET.
It is an S13 RWD engine and I am trying to put it back as close to factory as I can.
I don't want to run a catch can at this stage either.
Any pointers would be most appreciated.
Posted on: 2018/7/3 11:40
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
|
Guest_
|
.
Posted on: 2018/7/3 13:05
Edited by unfamilia on 2020/3/29 12:25:14
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
|
Guest_
|
.
Posted on: 2018/7/3 13:08
Edited by unfamilia on 2020/3/29 12:25:26
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
Quite a regular Joined:
2008/5/26 6:39
From Melbourne, VIC
Group:
Registered Users
|
I have checked about 3 different versions of the manual and there is nothing specific in there about it.
Posted on: 2018/7/3 14:28
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
Home away from home  
Joined:
2013/3/31 0:08
From Geelong, Victoria
Group:
Registered Users
|
This is also in the S13 CA18 service manual
Attach file:
 PCV.png (102.25 KB)
Posted on: 2018/7/4 0:03
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
Home away from home Joined:
2006/8/19 6:45
From Brisbane
Group:
Registered Users
|
Posted on: 2018/7/4 3:42
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
Moderator  
Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
|
This is the PCV layout -- 2 hoses. since everyone uses custom air intake they use the air duct a little different but factory it goes on the elbow duct after the MAF and before the turbo
Attach file:
 CA18DET PCV.jpg (58.81 KB)
Posted on: 2018/7/4 8:49
|
|
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
Quite a regular Joined:
2008/5/26 6:39
From Melbourne, VIC
Group:
Registered Users
|
Yeah the top two PCV hoses are pretty straight forward, its the one from the block to the back of the Right hand rocker cover that i need a bit of guidance for.
Also the standard configuration of all the heater and water hoses that it is hard to figure out.
I think i have most of the stuff under the intake sorted, but its the heater return back to the block that is also hard to find a pic of.
Also Vacuum lines are all over the place too.
Posted on: 2018/7/5 4:24
|
|
_________________
We spent 16 years seeing other cars and other people, but now we are back together.
We are both a bit older and a little wiser, we have a few scars and plenty of stories to tell.
Time to rebuild the old relationship and enjoy many more years together...
|
|
|
Re: CA18DET - PCV, Water and Vacuum hoses |
|
Moderator Joined:
2001/5/3 7:04
From 48 North
Group:
Registered Users
Contentmaster
Usermaster
|
can't find a pic, but here's a re-working of the Nissan diagram from 1200ute's link
it's just standard hose and steel tubing
the arrow connects to the side of the cam cover
Attach file:
CA18DE block breather 118-A_01 -.jpg (29.05 KB)
Posted on: 2018/7/5 11:07
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
Transfer
