hey guys i am chasing an a14 head, with absolutley no modifications to the inlet and exhaust ports. Basically i am asking for a standard one. How many types of 1400 head is there? i know there is a H72 is there any others? Thankyou.

theres also H89, good luck finding one thats not stuffed or soft, get it checked b4 u slap it on.

i thought only H72 was 1400 and H89 is 1500?
well i already have a H89 so im chasing a H72 by the sounds, any help PLEASE

my understanding is H89 is for both A14 and A15

you are probably right, i dont have much experience with them. either way im still after a H72 head

H89 has a smaller combustion chamber, giving a higher compression ratio whereas the H72 head has an open chamber. I'm not sure whether valve sizes are the same??

a14 head on ebay

This one is for sale, and in Melbourne. Let me know if you are going to bid on it, otherwise I'll grab it for myself (or try to). I don't 'need' it but if nobody else wants it a spare would be good. I'm just hoping to avoid bidding against a fellow forum member and putting the price sky high only to eventually pull out of the bidding or something.

Bit pricey i'd have thought.Buy it now at $195 indicates what the reserve is,and you still have to give it a re build.
I'd be viewing it in the flesh and making sure it's not soft or corroded.

That's not a good price at all.

jmac, perhaps you should advertise in the classifieds for an oval port head. That head is pretty pricey.

Iv'e also seen plenty go for more than $200
on ebay, and some not. What ever an
individual wants to pay i suppose.

The bidding starts at only $80 anyway