got the new driveline, looks great, installed and it fits good too, next too finish up the rear brakes.

figured i would add some more pics, new driveline in, progress on the rear brakes and h165, i get the new calipers tomorrow, the front rack and pinion all in, the hot side of the intercooler piping in, the cold side almost done, tucking the wires for the front light out thru the fender(guard). and the finished shift tower.

Attach file:

---

  210 046.jpg (138.39 KB)


  210 047.jpg (134.72 KB)


  210 048.jpg (139.11 KB)


  210 049.jpg (138.32 KB)


  210 050.jpg (138.17 KB)


  210 051.jpg (134.93 KB)


  210 052.jpg (139.96 KB)

Well i got the new rear calipers the other day, and got them installed, put on the right front caliper tonite and bled the brakes, also bled the clutch. waiting on some hardware to come in for the adjustable tension rods. next to drop the tank to install a 5/16 fuel tube, fans for the radiator, install the alum coolant overflow tank, more wiring, fuel pump, battery in the trunk, more wiring. i'm getting tired already.

nice work

is that a stock S110 rear axle with disk brakes?

brakes are now working, clutch is working to got the e-brake adjusted,took the front tension rod bracket and cut out center bigger and made it bolt up like the s13, so i installed the s13 adjustable tension rod, and then playing around i put on some 19" wheels on the front, started removing the fuel tank, and called it a day.

Attach file:

---

  210 057.jpg (141.28 KB)


  210 055.jpg (134.26 KB)


  210 054.jpg (139.62 KB)


  210 053.jpg (138.77 KB)


  210 056.jpg (139.49 KB)

Thanx DD, yes that is one out of a 1980 200sx, H165, with disk brakes, the calipers were shot had ot buy new ones, $70 each, but they work good now. I gotta remember to bring home some battery cable from work for the battery in the trunk.

gr8 job buddy - i m really impressed by the job you've done

finally got a nice enough day to roll the car out and take some more pics. was playing around and grabbed the 19 x 9.5 rear wheel to try it on and it just fits without rubbing, couldn't believe it.

Attach file:

---

  210 058.jpg (131.08 KB)


  210 059.jpg (133.22 KB)


  210 060.jpg (125.50 KB)


  210 061.jpg (130.10 KB)


  210 062.jpg (108.23 KB)


  210 063.jpg (116.25 KB)

Looks good¡

i like the idea of the black frame near the windows and the spoiler fits gr8 in there :) car looks really clean but devilish inside