|
|
Browsing this Thread:
2 Anonymous Users
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
No life (a.k.a. DattoMaster) 
Joined: 2006/5/5 4:46
From perth airport
Group:
Registered Users
|
compressed air
Posted on: 2011/5/30 3:16
|
|
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
No life (a.k.a. DattoMaster) 
Joined: 2009/8/26 6:58
From mandurah
Group:
Registered Users
|
Highpressure air and carby cleaner ,remove the line from the car (easy) and spray carby cleaner down the line then using a piece of hose join the line to a tyre inflater with the end unscrewed ,then pressurise and stand back for a minute ,the crap should come out the other end, if not repeat from the other end and so on till its cleared out
Posted on: 2011/5/30 3:32
|
|
_________________
77 1200 ute 77mm bore a15 ,12:1 comp ported and reconed h89 head fairly aggro cam ,billet rocker spacers twin 40mm solex carbs on bpro manifold MSD 6al2 with 2 step limiter 4speed 60a box hd clutch 2 inch exhaust locked 4:11 ute diff ...
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
Quite a regular 
Joined: 2011/5/20 3:02
Group:
Registered Users
|
Hey mate,
Yeah I've got some I'll post up later. Utes at the panel beater's now getting new rear quarters put on.
Cheers Mick
Posted on: 2011/5/30 5:36
|
|
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
Quite a regular 
Joined: 2011/5/20 3:02
Group:
Registered Users
|
Hi,
Anyone know a wrecker I can sell (for cheap as chips) my A12 engine, was running perfect before taken out, and gearbox? Also have dash, immac seats, seat belts, radiator etc etc..
Posted on: 2011/5/30 5:45
|
|
_________________
R32 GTR daily driver / 13b powered Datsun 1200 ute drag car project
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
No life (a.k.a. DattoMaster) 
Joined: 2006/5/5 4:46
From perth airport
Group:
Registered Users
|
hey mick bailz might be keen on ya seats , if the rad is in good nick and the dash i might be keen :D a12 n 4 speed might sell for 100-300 bucks
Posted on: 2011/5/30 5:56
|
|
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
Quite a regular 
Joined: 2011/5/20 3:02
Group:
Registered Users
|
Unfortunatley the dash is in pretty average condition, cracks etc. Also have heater core
Posted on: 2011/5/30 6:36
|
|
_________________
R32 GTR daily driver / 13b powered Datsun 1200 ute drag car project
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
Quite a regular 
Joined: 2011/5/20 3:02
Group:
Registered Users
|
Radiator is in immaculate condition
Posted on: 2011/5/30 6:36
|
|
_________________
R32 GTR daily driver / 13b powered Datsun 1200 ute drag car project
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
|
Guest_
|
if you dont have a compressor, nige blows real hard, and if you give him a tickle, he sucks too.
Posted on: 2011/5/30 13:22
|
|
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
No life (a.k.a. DattoMaster) 
Joined: 2008/1/20 11:52
From Perth WA AUS
Group:
Registered Users
|
Dreaming!!!!!!
Posted on: 2011/5/30 13:54
|
|
_________________
Datsun 1200 2Dr sedan.
|
|
|
Re: PERTH BOYS.. GO THE DATTO |
|
Home away from home 
Joined: 2010/9/5 13:47
Group:
Registered Users
|
KULH, im gonna see if my ute fuel line is the same, changed carbys tonight, idles like a dream. Im happy with the fuel can next to me, even with a durry hangin out of my mouth! Got a bit of wiring to do by the looks but hopefully done soon. Taking the boat out tomorrow so there goes a day of progress, but wakeboarding is easier than working on datsuns. Jordy, the coupe will hopefully be ready by the next 1 and got the missus keen to hav a steer as well, told her bout flippa n his missus. So keep me posted for the next 1. Jesse, worst bit i wana replace is rh side of boot, from boot seal to just below boot line, about 5 inches each side of the corner. Upload pics when i get a chance. Should get a quick coat of roadworthy paint on wednesday!
Posted on: 2011/5/30 15:06
|
|
|
You can view topic.
You cannot start a new topic.
You cannot reply to posts.
You cannot edit your posts.
You cannot delete your posts.
You cannot add new polls.
You cannot vote in polls.
You cannot attach files to posts.
You cannot post without approval.
|